2006-07-04 06:03:17 · 8 answers · asked by Anonymous in Home & Garden ➔ Do It Yourself (DIY)
Tile blades are available for jig saws and sawzallz, or rotozips.
2006-07-04 06:07:34 · answer #1 · answered by uncle bob 4 · 0⤊ 0⤋
I take it the tiles are already on the wall if so you have a problem athough the anwers already given are good
the fact that the tiles are on the wall means you will have to cut them on the wall there is a router bit for this but keep the speed down as you could easily break the tiles
ensure you wear eye protection
a good electrical supplies retailers store should be able to point you in the right direction of the tool not you local appliance store one that electricians use look under these in yellow pages
2006-07-05 02:23:19 · answer #2 · answered by bbh 4 · 0⤊ 0⤋
With a masonry drill bit, make a hole inside the square area you want to remove, then use a tile saw. It's similar to a coping saw and has a cylindrical blade which will cut in all directions.
2006-07-04 13:10:39 · answer #3 · answered by Boris 5 · 0⤊ 0⤋
mark it out by drawing round it. using a hard drill like tungstun or diamond, drill just inside the corners. If you have some sort of disc cutter, cut up to the holes then chisel it all out. If no cutter, youwill have to drill it all. Of course you will have on your gloves, safety goggles, hard hat and safety boots. Wont you?
2006-07-04 13:12:58 · answer #4 · answered by freetolarf 2 · 0⤊ 0⤋
with a dramel tool with a tile bit
2006-07-04 13:04:54 · answer #5 · answered by aussie 6 · 0⤊ 0⤋
Jezz---drill 4 holes and connect the dots with a tile saw...I don't know how I know that but I saw it once...
2006-07-04 13:10:15 · answer #6 · answered by Paris Hilton 6 · 0⤊ 0⤋
you can rent a tile saw at your local diy store fora few quid well worth it
2006-07-09 10:16:51 · answer #7 · answered by cookedermott 6 · 0⤊ 0⤋
some good ans there ,,,,,but be careful whats behind tiles
2006-07-06 19:08:16 · answer #8 · answered by bitsinbobs 2 · 0⤊ 0⤋