2006-07-04 02:29:04 · 6 answers · asked by munnu 1 in Science & Mathematics ➔ Physics
If the water is in the seat then you need a plumber! It is controlled by a series of valves and pressure from the water.
2006-07-04 02:33:48 · answer #1 · answered by Crispy critter 3 · 0⤊ 0⤋
There is a 'U' shape tube joined at the bottom of the toilet seat. The one end of 'U' tube is longer and directly joined at the bottom of toilet whereas the other end which is shorter in length is connected to the horizontal out-let. Thus the water in this tube remains always at the level of out-let. Due to 'U' shape the tube there remain some water at the same level even after the flushing the toilet.
2006-07-04 10:42:33 · answer #2 · answered by peekejee 2 · 0⤊ 0⤋
The outlet pipe of the toilet seat is in "J" shapped. The longer arm of the "J" shapped pipe is attached to the drain hole of the toilet seat and the shorter arm is attached to the outlet leading to septic tank. Thus the water level is always maintained to the height of the shorter arm of this "J" shapped drain pipe.
2006-07-05 06:08:39 · answer #3 · answered by K.J. Jeyabaskaran K 3 · 0⤊ 0⤋
The amount of water in the bowl reflects the amount of water in the tank. When you flush, the water from the tank replaces the water that is flushed down the bowl. As long as there is the same amount in the tank each time, the same amount fills the bowl each time.
2006-07-04 09:34:49 · answer #4 · answered by the_way_of_the_turtle 6 · 0⤊ 0⤋
It doesn't. For example, when you flush it. Also, some toilets have defects that make it difficult to reach the correct water level.
2006-07-04 09:32:29 · answer #5 · answered by Anonymous · 0⤊ 0⤋
Because if it begin rise or fall, you will feel rather uncomfortable...
2006-07-04 09:36:49 · answer #6 · answered by IT 4 · 0⤊ 0⤋