I would like to connect an LCD to a solderless breadboard. I'm planning to use an IDE cable to connect the 16 pins on the LCD's header to the breadboard. However, I need to add pins to the connector that will plug into the breadboard, and I want the pins to be secure. Any suggestions on adhesives?
2006-07-03 10:36:02 · 11 answers · asked by modi_ponens 2 in Science & Mathematics ➔ Engineering
good old epoxy should do the trick, almost all glues are nonconductive
2006-07-03 10:59:56 · answer #1 · answered by mfem.geo 2 · 0⤊ 0⤋
This Site Might Help You.
RE:
Is there an electrically non-conductive adhesive I can use to bind metal and plastic?
I would like to connect an LCD to a solderless breadboard. I'm planning to use an IDE cable to connect the 16 pins on the LCD's header to the breadboard. However, I need to add pins to the connector that will plug into the breadboard, and I want the pins to be secure. Any suggestions on...
2015-08-07 16:44:10 · answer #2 · answered by Anonymous · 0⤊ 0⤋
I have used hot glue from a hot glue gun to do this exact type of project. A hot glue gun can be found CHEAP in the hobby or craft section of any large department store. Hardware places like Home Depot and the like charge way more. You can get the same exact gun (maybe a different color plastic because it is in the hobby section) for extremely cheap. I bought mine (with glue sticks) for about $2.
2006-07-03 12:01:03 · answer #3 · answered by hack_ace 4 · 0⤊ 0⤋
All of the following work:
hot melt glue, gorilla glue(Polyurethane glue), epoxy resin(2part mix), and super glue. The polyurethane glue will probably adhere best to the plastic and metal.
2006-07-03 18:55:41 · answer #4 · answered by Lee J 4 · 0⤊ 0⤋
All metals are conductive. Go for plastics, glass, or ceramics
2016-03-16 01:51:00 · answer #5 · answered by Anonymous · 0⤊ 0⤋
5 or 6 minute epoxy
2006-07-03 11:12:46 · answer #6 · answered by Anonymous · 0⤊ 0⤋
There are also double-sided tapes of various thicknesses. This has the benefit of being removable later if you should want to reuse the breadboard for some other project. We use double-sided foam tapes in several assemblies.
2006-07-09 19:53:25 · answer #7 · answered by SkyWayGuy 3 · 0⤊ 0⤋
Just use a very small dab of epoxy and bake it to harden - used in industry all the time.
2006-07-03 15:37:32 · answer #8 · answered by rflatshoe 3 · 0⤊ 0⤋
For the best answers, search on this site https://shorturl.im/LutJo
They all conduct. Why do they have to be metal?
2016-04-01 09:08:34 · answer #9 · answered by Anonymous · 0⤊ 1⤋
I have an issue with the glue gun glue being somewhat conductive......i was surprised myself but it was.....i am looking for an alternitive myself for just that reason....
2015-03-30 11:17:33 · answer #10 · answered by Ray 1 · 0⤊ 0⤋