2006-07-03 10:21:37 · 7 answers · asked by Anonymous in Cars & Transportation ➔ Car Makes ➔ Ford
Not sure on your model. In the past it used to be stamped on a flat spot on the lowereend of the third member. Before that it was on a tag on a third member stud.
2006-07-03 10:26:59 · answer #1 · answered by Anonymous · 0⤊ 0⤋
2
2016-08-30 08:29:33 · answer #2 · answered by Maura 3 · 0⤊ 0⤋
tag on the rear end will get you the ratio and if it's a posi-traction rear end as well as the build date.
There is a code under axles on the label on the front drivers door area but you need to know the code to axle conversion .
other than that, If you ask a Ford dealer nicely, they can run the vin number and tell you the axle code, but some dealers don't do it, whereas others do it for a fee, and still others do it being neighborly
2006-07-03 11:09:40 · answer #3 · answered by gearbox 7 · 0⤊ 0⤋
No, you have to get it off the rear end tag. Its probley a 3:55 or 3:73 or 4:11
2006-07-03 10:45:56 · answer #4 · answered by Josh S 7 · 0⤊ 0⤋
Check the tag on the rear end.
If you see 350, that is your axle ratio.
From the vin you would have to go to a dealer.
2006-07-03 12:48:03 · answer #5 · answered by kayef57 5 · 0⤊ 0⤋
should be tag on rear end
2006-07-03 10:28:00 · answer #6 · answered by groovyrn34 2 · 0⤊ 0⤋
Contact me and get me your v.i.n. and i can run a build sheet on it.
2006-07-03 20:29:34 · answer #7 · answered by orgrmichael 4 · 0⤊ 0⤋