2006-07-02 20:01:31 · 15 answers · asked by Anonymous in Cars & Transportation ➔ Car Makes ➔ Ford
It's your truck saying get out before i break down right here. LOL
2006-07-03 02:26:56 · answer #1 · answered by babybro35 6 · 2⤊ 0⤋
it is not the CV joints because these are found only on front wheel drive vehicles with transverse mounted engines . the f 150 is a rear wheel drive vehicle. even 4 wheel drive f 150 will not have cv joints because the front wheels are driven by a differential and axel assembly.
where is the location of this clunk? is it coming from the rear of the vehicle? the front? under the dash board? Location of this clunck will make diagnosis easier to make.
2006-07-03 11:57:50 · answer #2 · answered by Atlk9doc 2 · 0⤊ 0⤋
If you here a clunking noise in your front end it is ball joints or tie rod ends. Once they start making that clunking noise they are in really bad shape. It is dangerous to drive your vehicle that way because you can lose a front wheel. As soon as you can take it to a repair center and have it checked. It won't be fun going down the highway and you lose your front wheel and your ability to steer your vehicle. REMEMBER Better Safe Than Sorry
2006-07-03 17:54:57 · answer #3 · answered by Frank P 1 · 0⤊ 0⤋
F-150 used a modified cv joint on it's 4 wds for 1997-2004 f-150 trucks.... if it's 4wd I'd look there first.
Clunk could be many a things including the idler arm or ball joints... go have it inspected by a shop to see where the noise is.
2006-07-03 17:39:44 · answer #4 · answered by gearbox 7 · 0⤊ 0⤋
Are you having any problems with the parking break? Our 2000 F150's parking break does not work anymore. When it was starting to go, it was making a clunk.
2006-07-03 15:58:46 · answer #5 · answered by Momof2 6 · 0⤊ 0⤋
Could be the CV joints, or a problem in your suspension. Depends on the clunk. Or maybe you forgot that log in the bed of your truck?
2006-07-03 03:10:28 · answer #6 · answered by Anonymous · 0⤊ 0⤋
As others suggested, check the cv joints, and u might wanna take a look at the inner and outer tie rods. since they are the main components that actually transfers the force from the steering wheel to the actual wheels and causes the wheels to steer. my nissan maxima had the same problem, i had to change the outer tie rods. good luck
2006-07-03 03:19:34 · answer #7 · answered by sadicnd 1 · 0⤊ 0⤋
a billion to 1 it is the sway bar links. i have litterally replaced
about 200 of them
2006-07-08 23:58:03 · answer #8 · answered by Acetone28 1 · 0⤊ 0⤋
Only when turning, could be CV joints:
http://www.automedia.com/CV/Rehab/ccr20021101cv/1
2006-07-03 03:04:32 · answer #9 · answered by blewz4u 5 · 0⤊ 0⤋
sounds like your cv joints
2006-07-03 03:06:03 · answer #10 · answered by deathdealer 5 · 0⤊ 0⤋