any tips on easy easy way to strip copper cable?(or wire) there is some thin cable and thick cable. i am so tired of trying to invent a way to make this job a little easyer.
2006-07-02 18:01:24 · 5 answers · asked by ashlee_only 1 in Consumer Electronics ➔ Other - Electronics
I need to strip ALOT. And yes I am VERY much aware of wire strippers, these dont work very well for such a larg job. Using a utility knife takes forever. I was only wondering if anyone had rigged up something that does this job fast and easyer than these ways. .... Oh, and burning it is out also. No good for the environment.
2006-07-03 13:09:57 · update #1
If you are doing it for scrap.wait till night and throw it on a fire then smack it with a baseball bat or something. It will come right of.ps: you didn't hear that from me,its bad for the environment.
2006-07-02 18:06:47 · answer #1 · answered by Anonymous · 0⤊ 0⤋
I don't know if you are aware that there are wire strippers that you can buy at the hardware store for taking insulation off from wires or not, but to my knowledge that's the easiest, although tedious way, of doing it.
2006-07-03 01:08:05 · answer #2 · answered by Anonymous · 0⤊ 0⤋
have u tried running a razor blade down it then peeling it apart that's if your trying to take it all off, if your just trying to take a little off like to insert it in a outlet to install it just cut it around the wire & pull it off or just go buy a wire striper.
2006-07-03 01:13:03 · answer #3 · answered by Diana.D1348 2 · 0⤊ 0⤋
burn it off,If you live where you can build a ground fire,put the wire in the fire and burn the rubber coating off of it.Don't leave it on there to long it will melt the copper.
2006-07-03 01:07:53 · answer #4 · answered by dragonsaver005 4 · 0⤊ 0⤋
Burn the insulation off.
2006-07-03 01:06:12 · answer #5 · answered by quietwalker 5 · 0⤊ 0⤋