looking to take it off and clean it so it possibly won't stick anymore.
2006-07-02 08:12:26 · 4 answers · asked by ridetheair2000 1 in Cars & Transportation ➔ Car Makes ➔ Ford
Its on the upper intake. 2 bolts and 1 vacuum line. and 1 tube. If its sticking then it will have to be replaced. Cleaning really won't help. If its a code showing up and no driveabilty problems then its the DPFE sensor that's silver 2 hoses and 1 wiring connector located on the tube going up to the egr. If its running rough at idle then replace the EGR. The EGR has a round top head on it about 3 inches around and its silver on top and cast iron on the bottom.
2006-07-02 10:19:06 · answer #1 · answered by Josh S 7 · 2⤊ 0⤋
If it is stuck you can pull strong vacuum on it to unstick it. There is probably full of carbon behind it in the throttle body, which makes it seem stuck.
2006-07-02 17:40:49 · answer #2 · answered by kayef57 5 · 0⤊ 0⤋
why do you think it's sticking?
those years had probs with deteriorated vacuum fittings and egr pressure sensor codes.
2006-07-02 15:18:34 · answer #3 · answered by kiaguy53 3 · 0⤊ 0⤋
Depends on which Engine you have as to where it is located
2006-07-02 15:23:21 · answer #4 · answered by iamright2 4 · 0⤊ 0⤋