I need to know the diagram of sparks plugs wire on a 1996 v6 ford explorer?

Answer 1

On the coil pack has numbers on them. eg: one row has 1-2-3,the second row has 4-6-5. On the pass. side head starts with spark plug number one closest to the radiator number two next to it and number three in the back. On the driver side head is number 4 spark plug in the front followed by spark plug five and six,towards the back.

Answer 2

The coil pack has the cylinder no. for the spark plug wire

Answer 3

passenger front is #1 then next is #2 then last is #3 then drivers side front is #4 then so on the ignition coil is marked on top so long as it is a factory unit as to which wire plugs into which coil spot

Answer 4

You should be able to with no cost request the firing order from advanced auto or auto zone on the firing order. I truly don't know if they will be able to give you a faxed copy. In case they don't out of courtesy, ask to to see the firing order in there book and bring along a piece of paper so that you can copy the firing order. Very important, don't forget to put down the firing order from the distributor cap to the plugs. After that you shouldn't have a problem as far as what your firing order is suppose to be.

Answer 5

Look on the coil pack, it is # for the cylinders. 1 is on the passenger side front 2 and three is on that side as well.

Answer 6

Also, there might be a firing order label somewhere under the hood. Usually on an emmissions sticker.

Answer 7

go to www.autozone.com they have all the wiring diagrams for almost all vehicles

Answer 8

I believe the information you are looking for can be found here:

http://www.autozone.com/servlet/UiBroker?ForwardPage=/az/cds/en_us/0900823d/80/0d/39/f8/0900823d800d39f8.jsp

Answer 9

search about it.