Does anybody no where i can find Bob the builder?

Question

I want to ask him if i can borrow his hammer

Answer 1

Borrow his hammer? (That's cute!)
He can probably be found in the phone book under "SCREWdrivers". (smile!)

Answer 2

hey, you can borrow my hammer anytime....I want Bob the Builder too, we want to add on a bathroom... Can we FIX it? how can you not like a "YES we can" kinda guy?
sighs and smiles from cryllie

Answer 3

I heard he's having an affair with Dora....


Oh, since this is the "Car Audio" section, heres this...

http://spkrbox1.spaces.msn.com/ for real "sound" advice.

Your system won't mean squat without a well designed box to put your subs in. Some manufacturers have recommendations as to dimensions of various types of boxes. It is best to find someone who builds boxes if you go with something other than a sealed box.

You should always match up RMS (Root Mean Square) watts of Subs and amp per channel as well as impedance's(resistances). When a sub has rating of 600 Watts MAX it really has an RMS rating of about 200 Watts RMS. RMS is the nominal wattage your most likely going to get out of it. Remember, a 200 Watts RMS amplifier has more power output than a 200 Watt MAX.


If your amp is rated at 4Ω don't subject it to 2Ω, it will fry.

Here is the formula for subs in parallel:

Z = 1 / (1/sub1 + 1/sub2 + 1/sub3 + ....)

For series, just add them up (sub1 + sub2 + ...).

You can mix and match these equations to get the right impedance required by your amp.

Example 1: Amp is 2 channel and rated at 4Ω, 4 subs @ 4Ω each. If I connect two in parallel and the other two in parallel and connect the two pairs in series, I would have a total impedance(resistance) of 4Ω. So to the amp, it's just one sub.

Example 2: Amp is rated 1Ω mono, 2 subs @ 4Ω each dual voice coil. If I connect two voice coils in parallel and the other two voice coils in series and connect the two subs in parallel, I would have a total impedance of 1.6Ω. Which would be perfect for a 1Ω stable mono amp.

You should use a capacitor as well.

Recommend for every 500 watts MAX you use a .5 Farad cap
Example: 1000 watts MAX - 1 Farad cap

You will also need what's called a "line level converter" if your stock head unit doesn't have RCA outputs or your amp doesn't have high-level inputs.

Try http://www.soundomain.com/shop you can find some really good deals, and this site is manufacturer certified. VERY IMPORTANT WHEN SHOPPING ON-LINE!!!

If you like I can send you some plans for reference. My plans are for a 4-th order band-pass bass box (A.K.A. bass-reflex) that holds two 12's.

Also included are java calculators you can use to figure parallel and series values given Ω values, tips on box building and types, calculating port diameter and length(if used), calculating box dimensions for types of boxes (sealed, wedge, cylindrical, etc.), materials needed and even how to make a jig for cutting perfect holes for your subs.

Just e-mail me [e-mail]

My system

Blaupunkt TSw1200 subs with a Sony Xplōd XM2200GTX.
My amp is 1200 watts (200 Watts RMS X 2), subs are 600 watts (200 Watts RMS) each, cap is 1.5 Farad

SPL is about 112 db each sub

Total cost(so far) = $410

Answer 4

Home Depot

Answer 5

he told me to tell you ok where would you want to meet him for the exchange of the hammer

Answer 6

CAN WE FIX IT? YES WE CAN!

Lofty hates mice. Why is that?

Is Bob sleeping with Wendy?

Answer 7

i am bob the builder, you can use my hammer or my screw driver...

Answer 8

I DPNT KNOW. I HEARD HE IS MERRIED TO WENDY BUT IS HAVING AN AFFAIR WITH DORA THE EXPLORER WHO IS ACTUALLY MERRIED TO DIEGO WHO WENT OUIT WITH BARNEY.



\'/
"BOB THE BUILDER, CAN WE FIX HIM"
"BOB THE BUILDER, NO WE CAN'T"
/'\

Answer 9

Go To Lowes or Home Depot

can they fix it?? YES! they can!

Answer 10

On the TV