just got a JVC CD Player (used)
and I've hooked everything up right
and when i turn the ignition on or crank the car,
it wont come on.
I can press the 'display' button and the lights & time will come on,
but thats it
the power button doesn't do anything...
and when i first plugged it up and turned the car on,
it said 'SEE YOU' and turned off
i did this a lot and then it sometimes say's 'HELLO' but then turns off.
i checked the fuse in the radio
and i ran the radio directly to the battery also, hot and ground. Help! lol!
The model is KD-S570 too!
SOMEONE HELP ME PLEASE!!!
2006-06-19 16:12:16 · 3 answers · asked by Brett 3 in Cars & Transportation ➔ Car Audio
The yellow wire connects to BAT(+)
The red wire connects to ignition or accessory switch
Other than this, I'm out.
2006-06-19 16:26:54 · answer #1 · answered by Anonymous · 2⤊ 1⤋
If that has a red wire, it goes to acc. switched fuse. If it has yellow, it goes to "hot all the time" fuse. If it has an orange wire, that is for accessory running off of the radio when it turns on (power antenna, for example) BUT that may also be an anti theft unit and when you first turn it on, you have to enter the code to get it to stay on. You will have to get that from the ORIGINAL owner. It could be "HOT" and then you will have some fun over coming the code feature.
It is new enough to need two power sources so for a temp test, twist both wires together, red and yellow, and try again. If that works then as above, yellow is used to maintain memory for presets and keep the clock running.
2006-06-19 17:01:08 · answer #2 · answered by Dusty 7 · 0⤊ 0⤋