2006-06-19 12:09:05 · 3 answers · asked by bobhanse 1 in Computers & Internet ➔ Software
Open up the computer and change the jumper on the back of the drive. If there are 2 drives on the same cable (the wide one) only 1 can be master and 1 slave. It should have instructions on where to put the jumpers on the back.
2006-06-19 12:14:06 · answer #1 · answered by Jon 3 · 0⤊ 0⤋
John U had the right answer. Only DVDs and CD-Roms need the master/slave setup. Hard drives can use CS (cable select) unless you have a hard drive and a DVD or CD-Rom on the same cable.
2006-06-19 19:21:44 · answer #2 · answered by smgray99 7 · 0⤊ 0⤋
upon booting up computer go into the bios mode look on your screen to see what t press to enter then adjust it from there
you will see wihich is your master and which is your slave
you then should beable to reverse them and restart
2006-06-19 19:14:40 · answer #3 · answered by ~~~*39nholdin*~~ 2 · 0⤊ 0⤋