2006-06-16 05:58:09 · 12 answers · asked by Anonymous in Cars & Transportation ➔ Safety
FYI
It is illegal to sell a car and not disclose that you have made a modification such as the one you are suggesting.
An easy way to get rid of the light would be to tap a screw driver into it with a hammer.
2006-06-16 20:24:22 · answer #1 · answered by Adam the Engineer 5 · 0⤊ 0⤋
You can improve your eyesight by simply learning, naturally and practicing the correct way to see for a few small minutes a day.
You can check this method based on a scientific researches : ( http://getyourvisionbacknow.keysolve.net )
If glasses are worn continuously over time the poor vision will generally become worse. Essentially what glasses do is lock the eyes into their refractive state and in order to see through your lenses you have to maintain the poor vision that the lenses are designed to correct.
"Restore my vision” program you'll be taken by the hand, it shows you how to improve your vision naturally, permanent and complete solution.
Even the American Optometric Association has been forced to admit these things! I'm sure that you will not regret your decision.
2014-10-06 13:05:10 · answer #2 · answered by Anonymous · 0⤊ 0⤋
Newer cars, take it into Autozone and they will loan a scan tool to you for free that can be used to turn it off.
It will also tell you which sensor triggered the light.
If you don't fix the problem the light will turn on again within a matter of days if not hours.
2006-06-16 06:04:36 · answer #3 · answered by hsueh001 5 · 0⤊ 0⤋
The most common reason that light comes on is because of the gas cap. either you filled the car while it was running or it is loose or it is leaking air into the tank. The tank has to keep pressure in it for the fuel system to run correctly
2006-06-16 06:06:54 · answer #4 · answered by me 4 · 0⤊ 0⤋
Take it to a garage and get it fixed. Killing the bulb won't get you through an emissions inspection, just a ding for a burned out or missing bulb and the inspection will still fail.
2006-06-16 07:38:31 · answer #5 · answered by Bostonian In MO 7 · 0⤊ 0⤋
a dummy light comes on for a reason something is wrong you dont just cut and snip to make the problem go away start doing some preventative maintanance and research your problem if you dont you will be sorry do a visual inspection do you see something obvious that needs to be fixed
2006-06-16 06:39:36 · answer #6 · answered by peter w 4 · 0⤊ 0⤋
Specific eye exercises can really help to improve your vision without surgery. I'm following this system http://www.goobypls.com/r/rd.asp?gid=413 and it's working well.
It's the best software of its kind.
Hope it helps.
2014-08-05 14:28:42 · answer #7 · answered by Anonymous · 0⤊ 0⤋
im guessing that you put a aftermarket exhaust or air intake. just pull the instrument cluster and pull the bulb. you will have to put it back come inspection time. no bulb no pass. i found out the hard way
2006-06-16 14:42:15 · answer #8 · answered by whip it real hard 2 · 0⤊ 0⤋
Shouldn't you see why the light is on. Out of sight doesn't mean all is fine.
2006-06-23 04:16:09 · answer #9 · answered by Tammy G 4 · 0⤊ 0⤋
service your engine
2006-06-21 18:36:17 · answer #10 · answered by Jackie A 1 · 0⤊ 0⤋