English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

6 answers

well you won't blow the speaker. I think it should be fine

2006-06-10 21:33:11 · answer #1 · answered by Anonymous · 0 0

Where did you get a 1 ohm amp and a 2 ohm speaker from ? Car speakers are usually 4 ohms or 8 ohms but to answer your question --- nothing , an audiophile might be able to detect the mismatch but no overheating likely etc .

2006-06-10 21:42:35 · answer #2 · answered by Realist 2006 6 · 0 0

Your system won't mean squat without a well designed box to put your subs in. Some manufacturers have recommendations as to dimensions of various types of boxes. It is best to find someone who builds boxes if you go with something other than a sealed box.

You should always match up RMS (Root Mean Square) watts of Subs and amp per channel as well as impedance's(resistances).

If your amp is rated at 4Ω don't subject it to 2Ω, it will fry.

Here is the formula for subs in parallel:

Z = 1 / (1/sub1 + 1/sub2 + 1/sub3 + ....)

For series, just add them up (sub1 + sub2 + ...).

You can mix and match these equations to get the right impedance required by your amp.

Example: 4 subs @ 4Ω each. If I connect two in parallel and the other two in parallel and tie the two pairs in series, I would have a total impedance(resistance) of 4Ω. So to the amp, it's just one sub.

You should use a capacitor as well.

Recommend for every 500 watts MAX you use a .5 Farad cap
Example: 1000 watts MAX - 1 Farad cap

Try http://www.soundomain.com/shop you can find some really good deals, and this site is manufacturer certified. VERY IMPORTANT WHEN SHOPPING ON-LINE!!!

You will also need what's called a "line level converter" if your stock head unit doesn't have RCA outputs or your amp doesn't have high-level inputs.

If you like I can send you some plans for reference. My plans are for a 4-th order band pass bass box that holds two 12's. Also included are java calculators you can use to figure parallel and series values given Ω values.
Just e-mail me sparky3489@yahoo.com

I chose Blaupunkt TSw1200 subs with a Sony Xplōd XM2200GTX and it moves my coffee table around when I'm in the driveway.

My amp is 1200 watts, subs are 600 watts

2006-06-11 11:10:24 · answer #3 · answered by Anonymous · 0 0

It seems to be in line with an early Tribulation Epistle, which Peter is (1 Pet 1). He's addressing this to the "strangers" and that would go with those Rev 7 144,000. Here Peter is exhorting them through the witness of Christ while He was in the flesh (human flesh - not the body He's in now - you're version has it wrong) that as He suffered and went through it, then you too can go through this time of Tribulation. If you remember that the Books starting with Hebrews is written for those who are going through the Tribulation and the birth pangs of the Millennium then it becomes less mysterious.

2016-03-27 00:25:45 · answer #4 · answered by Anonymous · 0 0

If your amplifier is 1 ohm stable, and you connect ONE 2 ohm speaker to it, it will run perfectly normal. IF you are connecting 2 - 2 ohm speakers to the amplifier, it should still run fine, though may run slightly warmer. All in all, 1 ohm stable amplifiers are gifts from the God's!

2006-06-11 18:19:35 · answer #5 · answered by casaudiotc 4 · 0 0

Hard to say, but it won't be pretty. Most likely there will be HEAT resulting in FIRE!

2006-06-10 21:32:50 · answer #6 · answered by Chuck G 1 · 0 0

fedest.com, questions and answers