2006-06-09 16:44:20 · 8 answers · asked by sithlord 1 in Cars & Transportation ➔ Car Makes ➔ Chevrolet
i would say u would screw them.
2006-06-09 16:47:36 · answer #1 · answered by ballin 2 · 0⤊ 0⤋
Loosen the engine mounts that look like a knuckle bone and use a 2 by 4 or a crow bar to pry the engine forward (from the back ) and lift the engine forward (with some ones help) or find someone who has smallhands like my daughter who can reach behind the motor
2006-06-15 23:54:09 · answer #2 · answered by Anonymous · 0⤊ 0⤋
take the two dog bones out of the front of the engine with the car in nuetral rock the engine forward put a block of wood behind the alt easy access
2006-06-10 18:54:07 · answer #3 · answered by AL 6 · 0⤊ 0⤋
We take them out from underneth the car. Or try taking off the front tire and going in over the supension.
2006-06-10 15:09:51 · answer #4 · answered by mastertech35 3 · 0⤊ 0⤋
let the engine cool down and reach bak there and replace them. its a tight fit but its the only way, if the plug wire are giving you grief try spining them as you pull on them.
2006-06-10 12:01:15 · answer #5 · answered by Anonymous · 0⤊ 0⤋
I assume its a V6 and the intake manifiold is covering them. Well, you have to remove the intake manifold. Good luck!
2006-06-10 07:07:55 · answer #6 · answered by bad_karma_kayla 3 · 0⤊ 0⤋
From underneath or you may be able to get to them from the wheel well (may have to take off tire).
2006-06-14 21:29:42 · answer #7 · answered by 63vette 7 · 0⤊ 0⤋
swivel head on a ratchet. It isn't easy on any sideways mounted engine.
2006-06-10 21:15:04 · answer #8 · answered by neopot2002 2 · 0⤊ 0⤋