2006-06-09 12:57:31 · 8 answers · asked by prevails_truthalways 1 in Science & Mathematics ➔ Weather
change your filter then check freon level
2006-06-09 13:03:19 · answer #1 · answered by laura468 5 · 0⤊ 0⤋
You could be drawing in air with enough water vapor for it to condense/freeze on the pipes. Check the vents, this problem can also lead to mold, which is helped to grow by running the air on less than max.
2006-06-09 13:02:52 · answer #2 · answered by sciguy 5 · 0⤊ 0⤋
Turn on the heat for 15 minutes in order to de-thaw faster.
"Freezing up" can be caused by a small leak in the coil.
Could also be caused by poor circulation --- have you blocked vents in some of the rooms in an attempt to save on AC $$$?
2006-06-09 16:44:14 · answer #3 · answered by firm_shake 4 · 0⤊ 0⤋
Set it to a moderate setting and run it all the time rather than expecting it to drop the temperature from 85F to 67F in 2 hours.
2006-06-09 17:10:01 · answer #4 · answered by Anonymous · 0⤊ 0⤋
icing on evaporator coil caused by: no or very low air circulation, -check evaporator motor, blower, v-belts, change or clean air filters; low heatload(outside temp.) -use blower only w/o starting compressor; check/charge refrigerant; defective thermal expansion valve -adjust or renew txv.
2006-06-09 13:20:16 · answer #5 · answered by MAQ 1 · 0⤊ 0⤋
if it is on a very low setting it can cause that like below 65
2006-06-09 18:30:34 · answer #6 · answered by Anonymous · 0⤊ 0⤋
What do you cut it with ?
2006-06-09 15:31:45 · answer #7 · answered by Anonymous · 0⤊ 0⤋
needs freon????
2006-06-09 13:01:33 · answer #8 · answered by TRILL 4 · 0⤊ 0⤋