on my jeep, there are three spots just above the cigar lighter where fog lights, locker swithes and what not can go. i pulled mine off on the was wires and a plug in to the back of the right slot. i dont have any switches here. what the heck are the wires for?
2006-06-08 14:30:01 · 6 answers · asked by Dustin G 1 in Cars & Transportation ➔ Car Makes ➔ Jeep
Manufacturers make one wiring harness for accessories, and if the accessory is not installed in that particular vehicle, there will be a wire there that goes to nothing! If you look in the owners manual, you will see what the switch that could be there would control.
2006-06-08 15:25:07 · answer #1 · answered by fire4511 7 · 2⤊ 0⤋
Any number of things can go there. The wires are there to be plugged in at the factory when you order the vehicle. They can be rear window wiper, rear window washer, fog lights, rear window defroster. You can trace the wires with a good continuity tester.
2006-06-13 13:02:11 · answer #2 · answered by Phil S 1 · 0⤊ 0⤋
On most TJ's the 3 switches are for rear defrost,rear wiper,and fog lamps.
2006-06-10 08:10:15 · answer #3 · answered by ezachowski 6 · 0⤊ 0⤋
Chances are it would have been used for the switch for the factory fog lights...
2006-06-12 16:57:43 · answer #4 · answered by Hrothgar 2 · 0⤊ 0⤋
Did you try tracing the wires down? I haven't noticed anything about this in the manual, but I haven't looked for it...and I haven't had that part of my dash open...yet...
2006-06-08 22:22:31 · answer #5 · answered by EEK! 3 · 0⤊ 0⤋
o i see
2006-06-08 21:32:36 · answer #6 · answered by ballin 2 · 0⤊ 0⤋