2006-06-06 13:18:28 · 9 answers · asked by tjrsk8r84 1 in Cars & Transportation ➔ Car Makes ➔ Ford
sometimes located in glovebox.
2006-06-06 13:24:34 · answer #1 · answered by Mr. BIG 5 · 0⤊ 0⤋
if you look in the trunk the sticker with the door code should be on the hinge somewhere. if you look in the glove box it might not be in the glove box but behind it. some people remove the sticker all together and put it with the owners manual. it could be possible that the other owner could of tossed it out all together. if you do find it you can do alot with it. you can lock the doors by pushing the 7/8 and the 9/0 together. get the code? press the code and just your driver door will open. want to open you passenger door with the key pad press in you code + the 3/4 key. how about open the trunk? you can open your trunk with the key pad also press in your code + the 5/6 and your trunk will open. and yes you can open your door, the passenger door and the trunk all at the same time. don't like the manufactures code look inside the owners manual and their will be instuctons how to change the code to your own personal code.
2006-06-11 03:26:58 · answer #2 · answered by phantomknight70 2 · 0⤊ 0⤋
Disconnecting the battery will only wipe out the codes you put in it does not wipe out the factory code. Sometime there is a card in with the owners manual that will have the code on it.
2006-06-06 20:42:53 · answer #3 · answered by Anonymous · 0⤊ 0⤋
Door codes? Do you mean the sticker that they stick on near the door jamb with all the info such as paint codes, tire size and tire pressure? Well then it is in the door jamb(where the door closes in the car)
2006-06-06 13:25:30 · answer #4 · answered by mailbox1024 7 · 0⤊ 0⤋
You can look for the sticker or you can reset the computer by removing the battery and letting it sit for a minute or two then reconnect it and put in the new code of your choosing.
2006-06-06 14:10:00 · answer #5 · answered by Mark 2 · 0⤊ 0⤋
the code won't erase by pulling the battery cable.
If it ain't on the lift hinge on the rear trunk, you have to get it off the module which I think is in the drivers door
2006-06-06 15:28:35 · answer #6 · answered by gearbox 7 · 0⤊ 0⤋
I highly recommend you to go to your certified Ford Dealer. They will surely give the code to you but they may charge you something.
2006-06-13 08:16:30 · answer #7 · answered by David l 1 · 0⤊ 0⤋
Dealers are suppost to place them in the truck. Also leave the card in the glove box with the code on it.
2006-06-07 04:35:31 · answer #8 · answered by Anonymous · 0⤊ 0⤋
Off the sticker located in the trunk.
2006-06-06 13:23:09 · answer #9 · answered by oklatom 7 · 0⤊ 0⤋