2006-06-06 10:04:45 · 6 answers · asked by Anonymous in Cars & Transportation ➔ Car Makes ➔ Ford
If the noise goes away when you step on the brake pedal while driving, the anti-rattle clip is missing. If this is the case go to an auto parts store & ask for a hardware kit for the front brakes. The kit will have all new clips included.
If the clicking is only when you are driving and is noticeable at any time while turning then the CV joints are dry and have been for a while. Look for a torn rubber boot as a sign of the joints being dry. The grease gets thrown out while driving with an open boot. If this the case, the best thing to do is to replace the CV shaft.
2006-06-06 11:41:08 · answer #1 · answered by demonguy71 3 · 3⤊ 0⤋
If it is the brakes, it could be a malfunction in the ABS, or else just break-in stress. I recently replaced the brakes on my '97 Ford Explorer, and they still squeal, so simply replacing them doesn't always eliminate the symptom, even if there isn't anything wrong.
2006-06-06 10:24:38 · answer #2 · answered by giovanni9686 4 · 0⤊ 0⤋
hi there youl find when the brakes were replaced someone has left out the pad slide witch stops the brake pads jumping about replace this and all will be good
2006-06-06 10:53:27 · answer #3 · answered by GEORGE T 1 · 0⤊ 0⤋
check for stones trapped between the discs and the pads
2006-06-07 05:42:33 · answer #4 · answered by charlie s 1 · 0⤊ 0⤋
its your cv axle not brakes
2006-06-06 10:11:13 · answer #5 · answered by rebrab728 4 · 0⤊ 0⤋
What the F**K is 'Break-in Stress ???
2006-06-09 01:25:13 · answer #6 · answered by rookethorne 6 · 0⤊ 0⤋