brand: Kenmore
Model: 110.26702690
2007-12-30 09:00:03 · 5 answers · asked by vinod k 1 in Home & Garden ➔ Maintenance & Repairs
Scott is most likely correct. You can find more info on your
washer (made by Whirlpool) at this site -
http://appliancequickfix.com/
2007-12-30 10:51:36 · answer #1 · answered by AMBER D 4 · 0⤊ 0⤋
Check to see what temps are coming in when you fill it for wash. Check hot, warm, and cold. Bet is you are not getting cold water (most washers these days only have cold rinse). No cold water will most likely be the water inlet valve has failed and will need to be replaced. Other options are the screen in the valve is dirty or clogged (less chance of that though).
2007-12-30 18:13:43 · answer #2 · answered by i138152930 3 · 0⤊ 0⤋
make sure water is turned on and if it is your cold water line is probly cloged....unplug washer and in back remove the water hose from machine (you should do this to both lines) clean out the washer screen both in hose and in machine where hose connects use a wire brush or old toothbrush...you should notice a big difference in water pressure....they get clogged alot so its a good thing to do.
2007-12-30 17:23:29 · answer #3 · answered by sissy 4 · 0⤊ 0⤋
could be the water fill valve, where the hoses connect to the washer
2007-12-30 17:15:51 · answer #4 · answered by wolfe0312 2 · 0⤊ 0⤋
you need to replace the timer, had a similar problem
2007-12-30 17:06:17 · answer #5 · answered by ariana 4 · 0⤊ 0⤋