2007-12-26 11:22:16 · 4 answers · asked by Justin J 1 in Cars & Transportation ➔ Car Makes ➔ BMW
just take it to your auto mechanic.... good luck
2007-12-26 11:30:02 · answer #1 · answered by sunshine 3 · 0⤊ 0⤋
It's not the blinker, if it were, then none of the lights would blink. Just replace the burned out bulb. Funny true story, When I was driving trucks years ago, I got back to the yard a little late. The dispatcher asked me what took so long. I told him my left turn signal had burned out and I had to make all right turns. He never asked me again either.
2007-12-26 18:55:28 · answer #2 · answered by johN p. aka-Hey you. 7 · 0⤊ 0⤋
I'm guessing you can't remove the turn signal housing. To remove it you will need a #2 phillips, just above the light on the inside flange of the fender is an access hole (shine a light down in to see the head of the screw with a plastic crown to align screwdriver) loosen screw but not to the point of removing screw. Once loose the signal light housing will slide forward to allow access to bulb.
2007-12-27 12:36:28 · answer #3 · answered by Tim R 2 · 0⤊ 0⤋
just slide a screwdriver under the blinker light and the bulb just slider out it attached behind the cover its easy to slide the cover out then u can try urself afterwards
2007-12-26 13:30:58 · answer #4 · answered by waleedakhter 3 · 0⤊ 0⤋