How to reset a Clearblue easry fertility monitor?

Question

I just bought a Clearblue Easy Fertility Monitor off of EBAY. Can someone please tell me how to reset it.

Answer 1

1. With the monitor OFF, place a clean unused test stick with the cap on (remove plastic cap from one end and snap it onto the other end of stick) in the test stick slot of the monitor.

2. *Make sure it snaps in.*

3. Press and hold the “m” button. Continue pressing the “m” button while turning the monitor ON.
**(NOTE: Do not take finger off “m” button until these directions say to do so.)

4. It will show you the “remove the test stick” sign. (a flashing test stick with an arrow pointing right) Continue pressing “m”.

5. Keep pressing the “m” button and in about 20 seconds, you will see a screen full of symbols. The screen will look as if it is going crazy and will be full of pics.

6. Remove the test stick first and then QUICKLY release your finger from the “m” button. All of the memory should be wiped out.

7. Your screen should display a flashing “m” and one or two dashes. If it does not, it will probably show a “1″ and a non-flashing “m”. If it does, then you need to repeat the process so it shows the flashing “m” and dashes.

8. Start using the monitor on CD 1 as per the instruction booklet

Answer 2

Try and google it for the instructions - I have no clue!