I just bought a Clearblue Easy Fertility Monitor off of EBAY. Can someone please tell me how to reset it.
2007-12-26 10:57:06 · 5 answers · asked by reese 1 in Pregnancy & Parenting ➔ Trying to Conceive
I also bought one off of ebay but luckly did not get a chance to use it but these are the instructions word for word that she sent me with mine! Hope it helps!
1. Remove the plastic cap from one end of a clean-unused-test-stick and snap the cap onto the other end of stick. Insert the test stick into the test stick slot of the monitor. The beveled corner on the insertion end of the stick must face in toward the monitor. THE STICK MUST SNAP INTO PLACE TO PERFORM PROPERLY. THE MONITOR SHOULD NOT BE TUNRED ON UNTIL STEP 2.
2. Press and hold the "M" button. Continue pressing the "M" button while turning the monitor on. NOTE: Do not take finger off the "M" button until these directions say to to do so in Step 5.
3. The screen will show the "remove the test stick" symbol(a flashing test stick with an arrow pointing right). Conitnue pressing "M".
4. Keep pressing the "M" button and in about 20 seconds, you will see a screen full of symbols. The screen will also display these symbols when you initially turn the montior on for the FIRST time. This indicates the memory is now cleared of all prior data.
5. Remove test stick first and then QUICKLY release your finger from the "M" button. The memory should now be cleared.
6. Your screen should display a flashing "M" and one or two dashes. If it does not, it will probably show a "1" and an "M" in a non-flashing mode. If so, you will need to repeat all steps of this process. This procedure may take several times before you successfully reset the unit to its"new" state.
7. Start using the monitor on CD 1 as per the instruction booklet.
HOPE THIS HELPS YOU AND BABY DUST TO YOU AND ALL TTC!!!!
2007-12-26 14:45:53 · answer #1 · answered by Anonymous · 1⤊ 1⤋
Clearplan Easy Fertility Monitor
2016-11-13 23:47:15 · answer #2 · answered by ? 4 · 0⤊ 0⤋
For the best answers, search on this site https://shorturl.im/awM4Y
1. With the monitor OFF, place a clean unused test stick with the cap on (remove plastic cap from one end and snap it onto the other end of stick) in the test stick slot of the monitor. 2. *Make sure it snaps in.* 3. Press and hold the “m” button. Continue pressing the “m” button while turning the monitor ON. **(NOTE: Do not take finger off “m” button until these directions say to do so.) 4. It will show you the “remove the test stick” sign. (a flashing test stick with an arrow pointing right) Continue pressing “m”. 5. Keep pressing the “m” button and in about 20 seconds, you will see a screen full of symbols. The screen will look as if it is going crazy and will be full of pics. 6. Remove the test stick first and then QUICKLY release your finger from the “m” button. All of the memory should be wiped out. 7. Your screen should display a flashing “m” and one or two dashes. If it does not, it will probably show a “1″ and a non-flashing “m”. If it does, then you need to repeat the process so it shows the flashing “m” and dashes. 8. Start using the monitor on CD 1 as per the instruction booklet
2016-04-07 19:24:01 · answer #3 · answered by Anonymous · 0⤊ 0⤋
Hope this helps!
2015-05-03 00:09:15 · answer #4 · answered by Anonymous · 0⤊ 0⤋
I don't know - ask the manufacturer.
2007-12-26 11:05:38 · answer #5 · answered by Precious 7 · 0⤊ 7⤋