Baby oil makes it shine like a new one.
2007-12-25 22:49:18
·
answer #1
·
answered by Sam 7
·
0⤊
0⤋
Stainless steel is known for its ability to be a clean surface that resists corrosion and rust. Dirt, dust and grime, however, put stainless steel at risk for corrosion and rust. Luckily, stainless steel responds well to cleaning, never wearing out from excessive cleaning, as long as certain rules are followed.
1. Water and a cloth.
Routine cleaning can be accomplished by using warm water and a cloth. This is the least risky option for cleaning stainless steel. Dry with a towel or cloth to prevent water spots. Wipe in the directions of the polish lines.
2. Mild detergent, (dish washing liquid) and cloth.
For cleaning that needs more power, mild detergent and warm water can do a great job without damaging the stainless steel. Make sure you rinse the surface thoroughly to prevent staining and spotting. Towel dry to prevent water spots which can be caused by minerals in water.
3. Glass cleaner for fingerprints.
Fingerprints are one of the biggest complaints about stainless steel, but can be taken care by using glass cleaner or household ammonia. Rinse thoroughly and towel dry. There are some newer types of finishes for stainless steel that resist fingerprints, a must if your pint-sized helpers leave their mark on your stainless steel appliances.
4. Stainless Steel Cleaner.
If you’ve had staining or scratching, or need to polish your stainless steel, a stainless steel cleaner may be a good option. Some of these cleaners and polishes can help minimize scratching and remove stains. They also can polish stainless steel surfaces nicely. Read the directions on the stainless steel cleaner and test in an inconspicuous spot. Be sure to rinse thoroughly and towel dry.
hope it helps. =D
2007-12-26 06:50:24
·
answer #2
·
answered by monica l 2
·
1⤊
0⤋
I bought a gorgeous stainless steel serving tray for my daughter at a second hand store. It had been standing on a shelf some where, was covered with a film of grease and was discoloured - it looked bad. I washed it in hot soapy water - no change. As I didn't want to scratch or etch the mirror finish, I opted to use a paste of baking soda - came out sparking!! No scratch marks or etching that would have happened with a gritty cleanser - just a mirror shine. Hope this works for your items' surface.
2007-12-26 09:25:14
·
answer #3
·
answered by Mawia 7
·
0⤊
0⤋
I have a stainless kitchen and love it; warm water then dry with a tea towel make sure you dry it good; maybe dry then dry again with another cloth this gets ride of streaks and give a shine, or (which I don't like using much) is windex I know a few house cleaners who keep windex (window cleaner) in business as they use this on all the stainless stuff and there is no prints and it shines.
2007-12-26 07:34:07
·
answer #4
·
answered by See 2
·
0⤊
0⤋
Bar keeper is very good for cleaning stainless steel,once cleaned,dry thoroughly & then wipe some baby oil all over.
2007-12-26 07:06:06
·
answer #5
·
answered by anna 6
·
0⤊
0⤋
Use an abrasive nylon cleaning pad and soapy water. You can also purchase stainless steel polish at hardware stores.
2007-12-26 06:49:41
·
answer #6
·
answered by Anonymous
·
0⤊
0⤋
Buy stainless steel cleaner.
2007-12-26 06:51:46
·
answer #7
·
answered by Sergio 4
·
0⤊
0⤋
Comet and a non abrasive scrubber
2007-12-26 06:49:39
·
answer #8
·
answered by Nurse_Jen 3
·
0⤊
0⤋
lemon juice, thats what we used in the military when i was in it,
2007-12-26 06:56:07
·
answer #9
·
answered by William B 7
·
0⤊
0⤋
Wash it and dry it.
2007-12-26 14:13:33
·
answer #10
·
answered by Anonymous
·
0⤊
0⤋