How Do I Refill A Lighter?

Question

I have 2 lighters, a zippo, and a novelty one that is shaped in the form of a revolver. The zippo has the hole for the pressure gas, and the cloth, but I can only see the hole on the gun, what type of lighter fluid/gas will I need?

Answer 1

As far as the Zippo, I've been using them for 30 years.
Open the lid, hold the body with one hand, grab the windscreen (the perforated metal part) with other hand, and pull insert out of body.
Turn insert over, lift white solid piece's corner opposite screw head, pour in fluid (specifically made for wick type lighters) to saturate cotton, replace insert into body.
By the way, the screw head is removed to replace the flint when it quits sparking. BUT BE CAREFUL! There is a spring under the screw that 'll fly out if you don't have a hold on it.

Answer 2

first off why the hell do you have them if you dont know how to use them?! ok im not going to be a jerk so ill answer, the revolver prob is butane, and you can buy that at like a gas station, and its a little bottle with like a blueish liquid in it, and what do you is take the cap off, and push the tip against the whole of the gun, and for the zippo, you take the lighter out of the case, flip it over so theres the cotton, get somethign to pull it off with, get ligher fluid, found at gas stations and fill it up, but not to much because you cna set your hands on fire, and also shake befor using

Answer 3

well the revolver probaly takes butane. The zippos would take liquid lighter fluid (not for a grill). You pour the fluid on the white cloth in it i think.

Answer 4

dude if ya dont know how to refill a ******* lighter u shuldnt have one in tha first place!

Answer 5

there's a can you buy from the store