I've lost my IP address for my Dell Notebook wireless connection - just says a series of zeros, what to do?

Question

My wife's wireless connection on her computer is fine (we use the same router) I have tried releasing my IP address, renewing it, nothing working, is there anything else I can do?

Answer 1

Right click on My computer icon, Properties > Hardware tab > Selcet Device Manger. > Enable Network Adapter .


Open My Network Places right click on the connection and click properties.

under the networking tab, choose internet protocol(tcp/ip) and click properties.

in the new dialog box, check "obtain ip address automatically"
and "obtain DNS server address automatically"Try power cycle.

Here how it goes

First Switch off the Notebook . Then Switch off the Wireless.
Then Swtich on the wireless. and then the Notebook .

It probable works . and this process is called powercycle.
Try it and let me know
It should work
Merry Christmas

Answer 2

There are several potential causes for this and all need to be checked

1. Did you change the wireless connection on the lap top to a static IP from a dynamic IP? If so, change it back to "obtain an IP automatically" status. This is not likely due to seeing zeros as the IP address but check it anyway.

2. Is the wireless radio turned off on the notebook? Sometimes they are set to shut off after not finding an access point. Make sure it is on?

3. What security do you have with the wireless access point? Is it set properly (including preshare key; is the MAC address validation active and is your wireless MAC address installed on your wireless).

Check these first as they are likely causes. If none of these are the cause, you may have a faulty radio on your notebook..

Answer 3

i might want to assert first examine in the journey that your ip address is computerized by employing doing what's declared above or authentic click on the on the spot connection icon on the bottom little bit of your reveal (close to the clock) and authentic click and click fix this can renew ur ip address. in the different case it will be some thing to do with your on the spot router and also you'll have tio configure it

Answer 4

use the 'obtain ip address automatically' feature

in your network connections, right click on the connection and click properties.

under the networking tab, choose internet protocol(tcp/ip) and click properties.

in the new dialog box, check "obtain ip address automatically"
and "obtain DNS server address automatically"

That should do it.