Help! I glued my work and it is wrong. Anyway i can fix it without having to start all over again? Thanks
2007-12-20 04:06:09 · 3 answers · asked by s_s_sport 1 in Home & Garden ➔ Do It Yourself (DIY)
more than likely it will break but not where it was glued...if it was just yellow carpenters glue you might try soaking it in warm water...if it was water resistant like titebond III that may not work...is it small enough to pass the glue up through a bandsaw...
2007-12-20 04:41:37 · answer #1 · answered by Anonymous · 0⤊ 0⤋
Try water it might make the glue soft>Read on the glue and call the manufacture>Like Elmer's glue don't use 2 much as it might stain the wood>
2007-12-20 12:20:19 · answer #2 · answered by 45 auto 7 · 0⤊ 0⤋
if you pry them apart it may damage the wood you can try it and if they come apart ok just sand them to reuse
2007-12-20 12:14:07 · answer #3 · answered by datsleather 6 · 0⤊ 0⤋