what is official height of dart board from floor. Where do you measure from?

Answer 1

five feet eight inches

Answer 2

Height Of Dart Board

Answer 3

This Site Might Help You.

RE:
what is official height of dart board from floor. Where do you measure from?

Answer 4

The board needs to be hung exactly 5 foot 8 inches from the floor to the centre of the Bullseye. Good quality boards are hung from the centre, making this measurement easy. If you have a board that hangs from the top, you will have to measure the distance from the centre of the bullseye to the hanger and add that to the height

Answer 5

Hanging The Board: The board needs to be hung exactly 5 foot 8 inches from the floor to the centre of the Bullseye. Good quality boards are hung from the centre, making this measurement easy. If you have a board that hangs from the top, you will have to measure the distance from the centre of the bullseye to the hanger and add that to the height. If a back board is used to protect the wall around the board, this will also have to be centred around the board.

Marking The Throw Line: The throw line (also known as the oche) should be about 3 feet wide. It may be made of tape, a store bought throw-line sticker, a piece of wood or metal. It should be placed exactly 7 foot 9 and 1/4 inches from the FACE of the board.

Answer 6

The board needs to be hung exactly 5 foot 8 inches from the floor to the centre of the Bullseye

Answer 7

The height of the board (from the floor to the centre of the bull) is 173 cm /5 ft, 8 in.

Answer 8

It's 1.73 or 5ft 8 inches metres to the centre of the board.

Source: http://www.bestdartstobuy.com/dart-board-height/

Answer 9

The location of your dart board is all important. It may sound obvious, but it’s essential to make sure there’s enough space to play a decent game of darts. As a guide you’ll need a clear area of around 11ft long by 5ft wide. Try to locate your dart board away from doorways or anywhere people may need to walk through. Not only can this be disruptive to the game, you don’t want to injure anyone with a stray dart!
Check that the wall where you’re mounting your dartboard is flat. You can either fix a backboard behind your dart board to protect the surrounding wall from damage from dart tips, or you could install a cabinet. Cabinets made especially for dart boards are useful for storing your darts and accessories, and enable you to close the doors on your board when it’s not in use.


Also check that your floor is flat and doesn’t slope at all. You may want to buy a dart mat to protect your flooring and to mark out the correct distance from the throw line to the board. Mats are good for covering concrete floors, which can damage dart shafts, and for protecting wooden flooring that is prone to becoming dotted with holes over time. Carpet is another option, but again it is subject to wear and tear.

When hanging your dart board it’s important to take accurate measurements. The proper height should be exactly 5ft 8” from the middle of the bulls eye to the ground. If you don’t have a dart mat, you’ll need to mark out a throw line on the floor, using tape or chalk, or a piece of wood or metal. The throw line should be exactly 7ft 9.25” from the board.

Answer 10

Same as the distance from the line.