English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

I have an HP laptop (Vista) connected to a wireless network (DSL connection) and a Epson CX5000 printer. Print server or adapter?

2007-12-19 02:24:56 · 5 answers · asked by Amy W 1 in Computers & Internet Hardware Printers

Thanks everyone! There's not a dedicated computer on the network, so sharing is probably out. Also looking at wiring constraints - it is currently not possible to have the printer in the same room as the gateway router. It's a pretty simple network with 1 laptop (possibly a second one very occasionally) and one printer. Do print servers have benefits over adapters?

2007-12-19 02:53:33 · update #1

5 answers

I use a print server connected to my wireless router. That way, all of my wireless notebooks and my wired desktops can use the printer as long as they are on the network.

2007-12-19 02:30:00 · answer #1 · answered by gatorstarhd 2 · 0 0

u can use a print server or u can just piggyback off a machine on the network. direct connect the printer on to one machine... make sure the machines on when u wanna use it. search ur network and u should find the printer. once u install it... it will be there everytime, that way u dont need to spend money on a print server or any adapters. only downside is u need the computer that the printer is connect to to be on

2007-12-19 02:29:47 · answer #2 · answered by sam in the 619 3 · 0 0

Open the printer properties in the Control Panel. Select the printer that you want to share by right clicking on it, and then click "Sharing". Now just share the printer to the network.

2007-12-19 02:32:05 · answer #3 · answered by Ron M 7 · 0 0

Professionally you are able to itemize all your fees on the bill (gasoline, time, aspects, incidentals and so on). Secondly it quite is complicated to pin down because of the fact the cost consistent with hard artwork varies from area to area. I even have charged as low as $40 5.00 consistent with hour and each element of an hour (I artwork a million hour and 10 minutes, I value for the finished 2 hours) to $a hundred twenty five.00 consistent with hour and any element of an hour. To get an concept of what the going fee on your section is call maximum suitable purchase or your community workstation keep and ask them as in case you have been the shopper. do no longer tell them you're finding for a value to bill somebody however, act as in case you like the artwork achieved for your self. by no potential sell your self short, by no potential! particularly in case you do solid artwork. word of mouth will make you or ruin you as a working laptop or workstation representative.

2016-11-04 01:07:28 · answer #4 · answered by chatan 4 · 0 0

it's good to have accesspoint that support LAN and wireless and LAN printer.let's connect them

2007-12-19 02:36:04 · answer #5 · answered by MMR 2 · 0 0

fedest.com, questions and answers