I just bought a new all-in-one printer, scanner and copier. It's an HP Deskjet F2110. However, I put a 74 ink cartridge in it and it's stuck and won't come out. Obviously it's the wrong one, since the printer does not recognize it (yeah, stupid, I know, but Wal-Mart had them sitting in the same display with the printers; I though it was the one that went with it). So, how do I get it out? I've tried everything! Even prying it out with butter knives! Any suggestions?
2007-12-16 06:10:42 · 12 answers · asked by Brittany L 3 in Computers & Internet ➔ Hardware ➔ Printers
buy another one. i've been there, done that with a steak knife, and coulldn't get it out.
2007-12-16 06:13:34 · answer #1 · answered by A random person 2 · 0⤊ 0⤋
Canon Selphy Ink Cartridges
2016-11-04 08:05:24 · answer #2 · answered by mcclam 4 · 0⤊ 0⤋
Void the Warranty?
Yeah, if you got a warranty, Otherwise it's a shiny brick!
Ok. This finally worked for me after #&$(*#&%*.
Tried everything above plus not so delicate operations.
The one re. debris stuck in printer made me think to pull
down on the paper feed lever, and once I did that, the
ribbon cartridge easily released. So makes me think
that lever possibly locks/releases the cartridge.
Try That! along with everything else.
Selphy 760 Printer
XP (don't laugh) system
2014-09-15 13:05:29 · answer #3 · answered by Tiki 1 · 0⤊ 0⤋
The last thing you want to do is try and rip it out and ruin the printer or even snap the plastic holster that holds the ink cartridge. Try to wiggle and tug while pushing upwards to ensure no damage to be done, if you cannot remove it its hard to tell you what to do. If it was the right cartridge you can send it of to HP to get a new/repaired machine, but its the wrong one so I doubt they will give support. Just don't give up just wiggle and pull upwards and good luck to you.
2007-12-16 06:16:11 · answer #4 · answered by Anonymous · 0⤊ 0⤋
Try from under neat, take the cover off (screws), if that don't work take back to the store, you still have the warranty and good luck and next time buy the right cartridge.
2007-12-16 06:21:47 · answer #5 · answered by imsety 6 · 0⤊ 0⤋
i did something like that once LOL!! but i just sat there wiggleing in backwards and falwards and it poped back out just mine was a epson but u cud try it see if it works put a bit of mussle into it to :) cause once there in there in but try not 2 stick anythin in there u might break the printer :)
2007-12-16 06:16:24 · answer #6 · answered by Daveh B 1 · 0⤊ 0⤋
yes remove the cover, be careful of the wire that is connected to the motherboard. keep nudging until it get loose. u will end up breaking the cartridge, so be sure to retrieve the loose pcs.
2014-07-26 06:44:04 · answer #7 · answered by Anonymous · 0⤊ 0⤋
If you installed the wrong Ink Cartridge then thats your problem.
Don
2007-12-16 06:15:55 · answer #8 · answered by Don M 7 · 0⤊ 3⤋
See if you can reach a finger under it and pop it out that way.
2007-12-16 06:15:39 · answer #9 · answered by Anonymous · 0⤊ 0⤋
Do NOT force it, any damage you do will invalidate your warranty. Contact hp, they are normally very helpful.
2007-12-16 06:16:20 · answer #10 · answered by Anonymous · 0⤊ 0⤋
Spray WD-40 on it!
2007-12-16 06:16:13 · answer #11 · answered by Ahab 5 · 0⤊ 1⤋