2007-12-16 03:32:19 · 3 answers · asked by jrsabado2004 2 in Consumer Electronics ➔ Music & Music Players
I love the InvisibleShield. Great product.
The iPhone (115 x 61 x 11.6 mm) is slightly taller, narrower and thicker than the Touch (110 x 61.8 x 8 mm). They make 2 types of InvisibleShield for the iPhone and Touch - one for the front screen only, and the other for the full body (it has one piece for the screen, and a second piece for the back that wraps over the edges). Both types come in pre-cut and contoured at the edge to exact dimensions so there is no trimming required.
If you get the front screen shield, you will have a tiny gap along the long edge (61.8 vs 61 mm) and you will have an overhang along the top or bottom (115 vs 110 mm). You can trim or roll over the edge, but that's going to be tricky due to the corner rounding.
If you get the full body shield, you have the same problem with the back/edge piece, and you'll have small notches for side buttons that the iPhone has, but the Touch does not.
My recommendation is not to do it. If you are very careful, you'll get it to protect, but it won't look perfectly right.
2007-12-16 04:25:02 · answer #1 · answered by HDN 5 · 0⤊ 0⤋
actually, the iphone is a bit taller than the ipod touch. so it might not fit.
2007-12-16 04:05:34 · answer #2 · answered by Steve 7 · 0⤊ 0⤋
yes
2007-12-16 03:36:13 · answer #3 · answered by panteryx_26 2 · 0⤊ 1⤋