My hot water boiler stopped working a while back. It is heated by electricity, not gas. Its a UK boiler if that makes any difference. Are there any points i can check over myself before i spend out money on getting someone out to look at it??
Thanks in advance!
2007-12-14 07:20:18 · 4 answers · asked by RM 2 in Home & Garden ➔ Maintenance & Repairs
Check the thermostat or the preassure gauge.
2007-12-14 07:31:45 · answer #1 · answered by buddy_prkr 2 · 0⤊ 0⤋
verify the water point interior the chilly water tank that refills you warm tank. it incredibly is regularly interior the attic, additionally verify the chilly tank for the suitable heating the comparable time. it incredibly is a smaller water tank. The water tank for the nice and comfortable tank ought to have a water point that's approximately 25 mm under the overflow, and the suitable heating tank ought to have approximately 6 inches of water in it. If those are ok, then verify tthe 2 motorised valves are the two open. those are sited close to the nice and comfortable tank. in the event that they are the two open, you could verify this by way of putting your hands on the two factors of the valve. in the event that they are open then the two factors of the pipe shoule be the comparable temperature. if the are closed, then verify the Programmer to make advantageous it incredibly is set for warm water and suitable heating. finally make advantageous the boiler pump is working while the boiler is on.
2016-12-17 18:07:26 · answer #2 · answered by donegan 4 · 0⤊ 0⤋
It depends on what it is actually doing. Check the breaker, make sure the pump comes on. Then it could be the element.
2007-12-14 07:57:48 · answer #3 · answered by Anonymous · 0⤊ 0⤋
check the breaker, or call a qualified repair man,
2007-12-14 07:23:45 · answer #4 · answered by William B 7 · 0⤊ 0⤋