I know the sew up the edges method but I'm hoping there is a quicker and better way of doing this.
2007-12-13 17:32:59 · 15 answers · asked by mb20and151 5 in Games & Recreation ➔ Hobbies & Crafts
I have seen it done with plain old masking tape. (Not duct tape)
I have seen decades-old projects with the masking tape still firmly attached.
.
2007-12-14 01:11:16 · answer #1 · answered by Kacky 7 · 1⤊ 0⤋
1
2016-12-23 04:04:38 · answer #2 · answered by Anonymous · 0⤊ 0⤋
If you have a sewing machine, use the zigzag setting, set the stitching length on the machine to a smaller size and sew around the edge of your fabric apprx. 1/8 -1/4in in from the outer edge. Be careful not to pull on the fabric, simply guide it, as pulling will send the even weave off kilter (especially if your using a linen). This is not the quickest way, but its the best way in terms of protecting your fabric from commercial fabric 'sealers' Like 'No Fray', and any kind of tape. Contrary to what the labels say, these items are in fact damaging to your fabric as the chemical compounds in both break down over time, do not completely wash out of your fabric, and can actually trap dye from the floss when washed-even by hand. This is something you want to last forever, not just a few years, so do yourself and future generations of those fortunate enough to receive your work, a kindness and secure your pce in a way that will last for centuries.
2007-12-16 06:59:27 · answer #3 · answered by nerisatis 1 · 0⤊ 0⤋
Best Way To Cross Stitch
2016-12-16 17:08:06 · answer #4 · answered by ? 4 · 0⤊ 0⤋
What I have done to some projects is I use a glue gun to run a thin layer of glue along the edge then by pressing the glue thru the fabric it "seals" the threads together.
Kinda the same idea as fray block.
I've also glued then turned the edge under.
2007-12-16 00:40:25 · answer #5 · answered by Heather R 5 · 0⤊ 0⤋
the problem with masking tape it can dry up and fall off if it is going to be a long project the best way is to sew the edges (on bigger projects. also it doesn't fray as much if you use a scroll hoop but I would still use the masking tape just in case.
2007-12-14 04:28:26 · answer #6 · answered by kellykat60409 3 · 0⤊ 0⤋
I use low tack masking tape. It must be low tack though otherwise it frays your aida as you take it off!! I find this method especially useful on larger projects when you can't always spare the time to hem the large piece of fabric!!
You can buy the LT masking tape from most decorating stores/hardware shops. Hope this helps!!
2007-12-17 04:42:09 · answer #7 · answered by Anonymous · 0⤊ 0⤋
For the smaller projects I use Fray Check. For larger more time consuming projects I use the masking tape as mentioned above. There is a crafters masking tape that is not as sticky as those available at hardware stores.
2007-12-14 02:25:12 · answer #8 · answered by mysteryperson 5 · 1⤊ 0⤋
Whenever I start a cross stitch project, I masking tape the sides, and then I work. When I'm done, I take the masking tape off. It has worked for years!
2007-12-14 01:33:49 · answer #9 · answered by mfrankenstein 2 · 1⤊ 0⤋
I always put masking tape on the edges. I notice one person takes it off when done. I usually leave it on. Guess it depends what you are doing with it when you are done. I usually frame and the removal of the masking tape is not necessary.
2007-12-14 02:03:30 · answer #10 · answered by ricksuearmour 3 · 1⤊ 0⤋
One method is to use pinking shears to cut the edge. This will help keep the edges of most fabric from fraying unless it is very loosely woven.
2007-12-15 04:43:44 · answer #11 · answered by IheartCrossStitch 2 · 0⤊ 1⤋