English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

I have a 1999 Ford Exp. and my right blinker just went out. Is that easy to fix or should I take it to the shop?

2007-12-13 03:49:49 · 8 answers · asked by eagfan5 3 in Cars & Transportation Maintenance & Repairs

Yes high_jin I do know how to use a screwdriver, thanks for your help.

2007-12-13 03:57:03 · update #1

8 answers

Probably just a bulb? find out if one ibrnt out front one pop hood look behind lens area see if bulb just twists out? lefty louse righty tighty. then go to back of veh. open to inside veh. on the right should a cover over light package (tork screw"*" heads) remove this look inside same kind of bulb holder remove check bulb if burnt out the little wire will be broken raplace with new bulbs both front nad back theres a little flasher fuse round under dash by stering wheel may need replacing to...

2007-12-13 03:57:22 · answer #1 · answered by ? 7 · 0 0

Suggest that a screwdriver is about all you need in most cases,plus the manual that comes with the car normally shows you how

2007-12-13 03:56:45 · answer #2 · answered by trapper1_CA T 5 · 0 0

It's cheaper to replace the bulb yourself.
You can get the bulb at any auto parts store.

Most places, like Autozone, will even help you put it in.

(Granted, it's the bulb that is bad and not something else.)

2007-12-13 03:54:27 · answer #3 · answered by monostang1998 1 · 0 0

It's pretty easy. Just go buy the right bulb and you can swap it out with a screw driver

2007-12-13 03:52:48 · answer #4 · answered by Anonymous · 0 0

Buy a new one at a place like Advance Auto Parts and they'll put it in for you.

2007-12-13 03:54:00 · answer #5 · answered by Rachael 6 · 2 0

if it is domestic just fix it yourself
take out the light and take it to autozone
problem solved

2007-12-13 03:53:42 · answer #6 · answered by enrique7718 5 · 0 0

go to parts store and ask guy if he can help u...most will replace them 4 you,

2007-12-13 03:55:11 · answer #7 · answered by Anonymous · 0 0

do you know how to use a screwdriver?

2007-12-13 03:53:35 · answer #8 · answered by Anonymous · 0 1

fedest.com, questions and answers