I heard a crash so i ran in to see what the problem is and it was my bathroom light cover that goes over the light bulbs half of it was still attached to the light and the other half was laying on the floor there is no cracks on were it attaches at all that was still intact So what caused this to break?
2007-12-12 14:05:54 · 8 answers · asked by 2bit 7 in Home & Garden ➔ Do It Yourself (DIY)
nope nobody was in there all day i had been home maybe ten minutes before i heard the crash
2007-12-12 14:11:37 · update #1
Due to the heat than cold all the time. Metal and glass expand differently. Screws back off. Clips move and so on. Yes I have seen it many times. Some times it is floor vibrations if there are people walking on the upper floor.
2007-12-12 14:32:43 · answer #1 · answered by Claude 3 · 2⤊ 0⤋
Could be rapid thermal expansion of the piece that connects to the light!!
-Did you just get done in the bathroom?
-Does the light get hot?
-Did U take a shower or something?
2007-12-12 22:09:05 · answer #2 · answered by Anonymous · 2⤊ 0⤋
It has to do with age and in a bathroom there is moisture. The parts connected where corroded with rust. It just rusted thru. Good to hear no one was hurt. Just replace light fixture.
2007-12-12 23:24:52 · answer #3 · answered by Big Deal Maker 7 · 2⤊ 0⤋
your bulb might exceed the maximum wattage for the fixture
2007-12-13 15:13:41 · answer #4 · answered by empty-nester 2002 5 · 1⤊ 0⤋
heat from the globe and a cheap cover.
2007-12-12 22:10:31 · answer #5 · answered by boxhead522000 2 · 2⤊ 0⤋
ghosts, call a priest.
2007-12-13 03:58:50 · answer #6 · answered by James M 4 · 0⤊ 2⤋
http://answers.yahoo.com/question/index;_ylt=Av9HQIS.LXkYnKnpwcmKPBZ.6xR.;_ylv=3?qid=20071212192438AANYVpm
HELP
2007-12-12 22:29:56 · answer #7 · answered by Anonymous · 0⤊ 3⤋
this because of overheating and inferior quality of the material////////////////////////////////
2007-12-12 22:52:37 · answer #8 · answered by GargVK 7 · 0⤊ 2⤋