D.I.Y snow globe?

Question

I would like to make a snow globe for my boyfriend for Xmas, but the thing is im not sure what type of modelling clay is suitable to withstand the long time under water. I also donno how i should go about modelling those clay because my handicrafts seriously sucks. I really like the idea of a snow globe, because personally i like them so much, what should i do?

Answer 1

Blondy's lesson would be most suitable for a simple snowglobe... if you use purchased items made from plastic, glass, or unrustable metal, for example, you'll have no problems and could find lots of things you might want.

You can also use polymer clay (though I wouldn't use "modeling clay" or certainly an air-dry clay even if sealed) for some or all of your items... it's basically waterproof. If you're interested in that, or would like to find some lessons on making your own globes, suggestions for water mixes to allow "snow" to fall correctly/etc, and links for buying globe kits, etc., check out this page at my site:
http://glassattic.com/polymer/outdoor_snowglobes_fountains.htm

HTH,

Diane B.

Answer 2

Don't use modeling clay at all. Go to a good 'craft store' and tell the clerk that you want to make a 'personal snowglobe' for your boyfriend ... they have the parts for the outside, plus many different things you can put inside ... the only 'craft' you'll need is the assembly of the 'stuff' inside ... I'd tell you to learn how to use 'resin' and molds, but that could take too long for this Christmas ... however, you could give him a snowglobe EVERY YEAR for Christmas and show your 'improvement' as well as your 'relationship' growing stronger ... and you don't use WATER in a snow globe ... you use a 'clear suspension gel' so the 'snow' falls more slowly. ASK AT A GOOD CRAFT STORE ... and have a lot of fun learning how to do this craft ... YOU will be 'hooked for life' ...

Answer 3

Tools:

baby-food glass jar with a screw-top lid
small plastic figurine
glitter
1/2 tsp. glycerin
clear-drying glass epoxy
ribbon
spray paint to decorate the jar lid
decorative scrapbook paper
glue stick
scissors
distilled water


1. Wash and dry the jar and lid.

2. Paint the outside of the lid and allow to dry.

3. Trace the shape of the lid onto the back of the scrapbook paper. Cut out the circle shape and glue the paper to the top of the lid (figure A).

4. Attach the figurine to the inside of the jar lid with the clear epoxy (figure B). Allow to dry upright for 48 hours.

Answer 4

best answer i can give you is to go to the library, ask them to help you find a craft book on making snow globes and then you will have all the info.

Answer 5

Remove the bottom of the snow globe and there will be a slot for you to insert the photo, replace the bottom and your done.

Answer 6

That's pretty romantic but may I suggest getting something from the electronics dept. instead?

Answer 7

stuff the snow globe

give him a - - - - - - -

you can add in your own letters

Answer 8

why not use a glass jar?

Answer 9

be creative