how do i etch glass?

Question

i bout a bottle of gallery glass brand window etch medium, but it does not give instructions. can someone explain the process to use this brand. i also have armour etch cream can someone explain the process to use this product. i want to create frosted glass and also simple frosted designs on table tops and so forth. i am a glazier, so i have acess to all the glass i want so i do small craft projects for a hobby. thanks

Answer 1

Avoid getting you hands in the stuff. Mask the pattern with tape, masking film, or masking medium (liquid). Brush the stuff on as evenly as possible and wait. Wash the brush out immediately. After 5-15 minutes, wash off and lightly brush to remove all residue. Look at the frosting, which may be lighter than you expect. Apply more if needed before removing masking and final washing. Make test runs in which you apply modest areas a one or three or five minute intervals untill the first one has been on for half an hour and the last for the time interval, wash thoroughly and note the time on each sample for future reference.
Depending on what you expect, you may get into abrasive blasting to get what you want.

Answer 2

Armour Etch Directions

Answer 3

Armour Etch Instructions

Answer 4

If you just purchased a home and you have no price range for a expert landscaper you just come to the appropriate area https://tr.im/rTlov so that you understand how to deal with landscaping even if is your first encounter due to the fact is usually a initial for every little thing.
Ideas4landscaping is a digital downloadable assortment of 300 stage-by-step guides, themes and video tutorials and consists of more than 7250 high resolution photos for those individuals who are searching for inspiration and tips to boost their landscaping wants. The package comes as a Pc CD ROM as well.
Full with images and effortless diagrams, this system will make you look like an skilled in this world of landscaping in front of your pals and household.

Answer 5

All the answers about using a blade are sound but there is one more thing you should do first.Using a sharp but rigid blade,like a Stanley knife,score the paint between the glass and wood then,when you scrape the paint off the glass you will have a clean edge.

Answer 6

well you should have two products, maybe you do. One actually etches, burns the glass, the other can mask areas you do not want etched, so they stay clean. Figure out which is which, then you can lay out a design with the masking agent first, then put on the etching agent.