English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

I am not to familar with this jeep I have a head light burnt out Is it a task that will need tools or that it is only 7yrs oldwill it just have some bolts to keep it in.Also how hard is it to line up

2007-12-03 17:35:29 · 2 answers · asked by bigdwg08 1 in Cars & Transportation Maintenance & Repairs

2 answers

If I remember correctly just pop the hood and behind the light are two "L" shaped bars that slide downward to hold the light assembly in place. Pull the bars up and remove the assembly. Remove the bulb socket by twisting it counter clockwise. replace the bulb (Don't touch the new bulb with your bare fingers you'll leave body oils this is bad) put the socket back in with a clockwise turn, replace the assembly and slide the bars back into place. Very easy actually. The bars could also be screws not sure.

2007-12-03 17:42:57 · answer #1 · answered by dennis f 3 · 0 0

not too bad just a #2 phillips head screw driver to take the screws out of the retaining ring

2007-12-03 17:40:16 · answer #2 · answered by justin c 4 · 0 0

fedest.com, questions and answers