i started to have trouble with this before when it started to get cold.. now its back but worse.. it wont start now..what do i do thats not expensive??
2007-12-03 11:13:45 · 5 answers · asked by Anonymous in Cars & Transportation ➔ Motorcycles
As mentioned, you may have a low battery. If so, when starting it could pull the voltage down enough to interfere with the voltage going to the injectors. Without enough juice, they won't open. Not sure exactly how your system is set up, but on my injected bike I have to open the throttle up quite a bit when cranking. By doing so, the throttle position sensor tells the DFI box to inject more fuel, acts just like closing the choke.
2007-12-05 02:53:19 · answer #1 · answered by bikinkawboy 7 · 0⤊ 0⤋
Come on individuals. gas injected engines use a working laptop or computing device to meter the gas to the cylinders. Stepping on the throttle purely opens the butterfly valve to allow greater air and purely greater air into the intake manifold. The throttle place sensor sends a sign to the computing device and the computing device determines how lots gas to deliver to the engine based upon engine load (MAP), engine velocity (CKP) and different sensors. in the experience that your IAP is plugged, then stepping on the gas might help.
2016-10-19 01:25:49 · answer #2 · answered by ? 4 · 0⤊ 0⤋
try putting a jump starter on while cranking it might need the extra juice to run the Electronics.You might check the intake and make sure that its not plugged. Also check the plug to see if it is black or needs replacing.
2007-12-03 11:32:28 · answer #3 · answered by 4wheeler nut 4 · 0⤊ 0⤋
try to check the connection of the battery and make sure that the spark plug clean and dry then try the kick starter!
2007-12-03 22:36:21 · answer #4 · answered by Erica J 2 · 0⤊ 0⤋
Charge the battery if it needs it.
2007-12-03 13:43:24 · answer #5 · answered by mushki 5 · 0⤊ 0⤋