how to clean a goped engine from oil?

Question

if any one know how to clean goped engine please write

Answer 1

Take it to the car wash, they have an engine degreaser setting on thier washers!! DON"T DO IT WHILE HOT, let it cool down 1st!! Degrease, letit soak, hi-presure wash, then hi pressure rinse!! Close the hood,&wash the rest of your car now, cause its got gunk all over it!! good luck

Answer 2

take it to the shop...have the replace the vavle cover gasket and the oil pan gasket....while the do that the can clean up the oil pump pick up screen..that sluge is covering bolth the pan and the covers. the need to be taken off and cleaned out throughy..i just did this to a 2004 toyota matrix with a 1.8 4 clyinder motor... my customer asked for a engine flush. once i took the oil cap off and looked under neath it was horible.. the motor only had 23000 miles on it.. the customer only changed the oil twice.. it did wonders cleaneing those parts...engine flusing can cause more harm than good..i dont recomoned flusing motors

Answer 3

In days gone by, using motor oils in 2- stroke mixes was usual. But nowadays specialised 2- stroke oils are being marketed. One problem with engine oil is something you mentioned in the question. It is multigrade. That means it has greater viscosity (thickness) when cold, but gets lighter (thinner) when at 4- stroke operating temperatures. It will never get hot enough in a 2- stroke, so will always be too thick! These specialised oils are available for 2- strokes. Use them.

Answer 4

spray it down with a good degreaser and rinse! Very simple!