English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

I installed new hard drives on my e machine computer and it says that TLDR is missing to restart and when I do it says the same thing, what did I do wrong?Any help Please and thank you very much!

2007-12-03 08:40:44 · 7 answers · asked by ashley g 1 in Computers & Internet Hardware Desktops

7 answers

I think you mean NTLDR is missing. Have you loaded the operating system onto the new drive?

wdw

2007-12-03 08:44:18 · answer #1 · answered by Who Dares Wins 7 · 0 0

If you are adding this as a second drive, it sounds like you have the master/slave pin settings mixed up between your existing drive and the new drive. Your original drive would be the master and the new drive would be the slave. Basically the system can't find the NTLDR file on the new disk.

If you are adding this as a replacement to your old disk, you must install the operating system onto the disk (either through the OS installer disk or a system recovery disk).

2007-12-03 08:46:43 · answer #2 · answered by Jim Maryland 7 · 1 0

It means, just as it says. Ntldr, is the boot loader for Windows NT/2000/XP/Vista. It wont boot without it.
If you are unable to boot to safe mode, then you will, at a minimum need to repair the file to be able to boot.
If you have the operating system CD, then you can try inserting it and doing a "repair" to the operating system, if you need to try to preserve your files.
However, I have found the Windows "repair" that comes with WXP to be less than effective. For data recovery, I like to use an open source operating system that runs "live" from the CDrom drive. A couple that do that well is: www.kubuntu.org or www.slax.org. Also good is Knoppix (best at data recovery) or www.mintlinux.com

2007-12-03 08:50:00 · answer #3 · answered by Anonymous · 0 0

You need to boot from windows xp disc. Disc will load files. Quick format of hard drive. Then install windows. Remember to install all drivers too. If you don't have them. They can be found on manufactures website.

2007-12-03 08:45:05 · answer #4 · answered by Anonymous · 1 0

in case you basically deploy it (such as your previous force nonetheless on your pc), it may up with like 297.01 GB available. there is a few rounding taking position contained in the frustrating force market, yet there are different things you may not see on your frustrating force. as an celebration, in case you acquire your pc from HP or a huge manufactuer like that, danger is there's a hidden partition (a branch interior of your frustrating force) storing restore application. This keeps the restore application (that may do such issues as diagnose issues such as your pc/frustrating force and re-deploy your operating device, etc.) probability-free from viruses, or maybe gives you a touch corruption probability-free practices for the hidden partition (because it isn't being accessed). Sorry if this change into TMI :P

2016-10-25 09:28:51 · answer #5 · answered by ? 4 · 0 0

Format the drive and then use it, always format a new drive when you install them. After you formay it reinstal your OS and you should be good. The first answer is also correct!

2007-12-03 08:47:44 · answer #6 · answered by Anonymous · 0 0

NTLDR - this is a file used to boot Windows. You need to find someone near you who knows hardware and have him/her do this before you jack things up. I could explain it here but if you do it wrong, all is broken.

2007-12-03 08:45:11 · answer #7 · answered by Anonymous · 0 0

fedest.com, questions and answers