remote programming for 2001 honda odyssey?

Answer 1

If you're asking about programming the keyless remote you can do it this way:

Sit in the driver's seat, put the ignition key in the ignition and make sure all of the car doors are closed but not locked.

If you have one old remote and you are adding a second remote you will need to have both remotes available when you do this procedure. If you don't have any remotes and you are programming a new one then obviously you only need to have the new one with you when you start the procedure.

Then hold the keyless remote in your left hand. With your right hand, turn the ignition key to the "ON" position so that the instrument panel lights come on (You don't have to start the car).

When the instrument panel lights come on, press the lock button on the keyless remote transmitter.

After pressing the lock button, turn the ignition key OFF.

Then, turn the ignition key ON and press the remote lock button again and turn the ignition key OFF.

Repeat two more times. On the fourth time the doors should lock in response to pressing the lock key on the remote.

use the remote to unlock the doors after they lock.

If you have a second remote to program, press the lock button to lock the doors and then the unlock button to unlock the doors before turning the igntition key OFF.

Turn the ignition key OFF when done and you're set to go.

Hope that answers your question

Answer 2

Honda Odyssey Keyless Remote