I have 2005 Chrysler Pacifica, that came with the Remote Start installed. Recently the batteries went dead so i replaced them and the start works but you have to be like a foot away pointing it at the car.
Any ideas why it doesn't work... Do i need to reset the remote?
Thanks!
2007-12-02 09:53:27 · 4 answers · asked by someone 1 in Cars & Transportation ➔ Car Makes ➔ Chrysler
I bet those batteries are defective. Reason being, they are not the type that sells alot so they may have sat on the store shelf too long.
2007-12-02 09:57:45 · answer #1 · answered by Anonymous · 0⤊ 0⤋
I'm inclined to agree with Mr. Know it all. I replaced the ones for my wife's '97 Dakota some years ago and had no problem. But all hers does is set the security and lock the doors. Good Luck.
2007-12-02 10:02:13 · answer #2 · answered by Don't know everything ! 7 · 0⤊ 0⤋
remove the batteries and check the voltage in them with a meter. the battery will say the voltage on it, normally they are 3 volts.
2007-12-03 11:47:41 · answer #3 · answered by sprinkles 6 · 0⤊ 0⤋
I really feel for you. Your life must be so hard without this. Seek counseling.
2007-12-02 09:57:55 · answer #4 · answered by Anonymous · 0⤊ 0⤋