English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

My roomate screwed up my computer and took the disk and manuals. I need the set up instructions and the driver for this model. By the way Linksys does not have this driver for download on their website. Any help would be appreciated. If you have the quick reference guide that would be helpful as well. Since the manual they have for download does not include this. Thanks again!

2007-12-02 06:54:23 · 0 answers · asked by Jammin246 3 in Computers & Internet Computer Networking

0 answers

Well , here is a link to all of the guides for your router.
http://www.linksys.com/servlet/Satellite?c=L_CASupport_C2&childpagename=US%2FLayout&cid=1166859837401&pagename=Linksys%2FCommon%2FVisitorWrapper&lid=3740137314B337

There isn't any "driver" cause this is a network device and there is no driver needed!!!! You simply connect it and your device drivers on your computer connect to it! It is a stand alone device!

You can get firmware updates from the same link posted above. The basic setup is to connect your computer to any one of the 4 LAN ports using a standard eithernet cable.
Restart your computer or turn on your computer. Once you have rebooted, open a web broswer (Internet Explorer) and enter
http://192.168.1.1 in the address bar. That will connect you to your router. The default username and password is admin just leave the password blank?? I think. That should get you going.

Good Luck and Merry Christmas, God Bless

2007-12-02 07:12:19 · answer #1 · answered by Tracy L 7 · 0 0

Wrt54g V8

2016-11-05 04:59:09 · answer #2 · answered by arrocha 4 · 0 0

I dont belive you need drivers for it if your not going USB with it, just go too 192.168.1.1 to set it up...Thats all i have too do for my Linksys WRT router

2007-12-02 06:58:39 · answer #3 · answered by Anonymous · 1 0

j`ai le routeur linksys WRT54GS j`ai tout essayer j`ai pas de signal a mon ordi de bureau nada rien

2015-08-05 11:44:30 · answer #4 · answered by guy52 1 · 0 0

You do not need any software to use this device! just open the built in web server & configuration tool.

2016-03-16 12:34:54 · answer #5 · answered by Anonymous · 0 0

have you tried: http://www.wrt54g.net/
There are lots of models of the 54g and firmware downloads.

2007-12-02 07:09:42 · answer #6 · answered by Tracy W 2 · 0 0

fedest.com, questions and answers