what do you do when you can start up wendows? it turns on but it comes to this black screen that says start wendows normaly or safe start and so on but no matter what you click it always brings up the blue screen. how do i get around this or fix it ?
2007-11-28 01:29:47 · 9 answers · asked by crack 1 in Computers & Internet ➔ Hardware ➔ Monitors
this is a hardware issue...have you installed any new hardware on your comp? if yes then remove it and try or else in case you have 2 RAM's inside your comp remove one and try to start your comp with one ram...remove both the RAM's alernatly and see what happens ...may be one of the RAM or the slot is damaged
you could also try to unplug ur PC complty and re plug it
2007-11-28 01:44:45 · answer #1 · answered by Anonymous · 0⤊ 0⤋
There is a good possibility that running the Windows Repair Console will fix this problem. To do this, read the info below.
USING THE WINDOWS REPAIR CONSOLE
Put your XP disk into your CD drive and restart your system. This will start the XP installation process. When you come to the screen that asks if you want to install XP or if you would like to “Repair” XP, choose Repair. This will open the repair console command prompt. At the prompt, type: chkdsk /r. (There is a space between the k and the /. Now hit “Enter”. The repair should now start. Allow it to run until it stops. This can take some time, so be patient.
If all goes well, XP will replace any and all missing operating system files.
2007-11-28 01:47:06 · answer #2 · answered by Ron M 7 · 0⤊ 0⤋
Boot it up in safe mode then go to my computer click on display and you should be able to fix the problem from there.
2007-11-28 01:34:50 · answer #3 · answered by Anonymous · 0⤊ 0⤋
it might not be that bad, if you are willing to try some things first
use your install cd and get to the recovery console. After loading that up do a chkdsk
then try to get into windows again
if that does not work post back here
2007-11-28 01:34:00 · answer #4 · answered by Anonymous · 1⤊ 0⤋
you seem to have the "blue screen of death" - all you can do is - reformat - and hope it will let you. of course you're going to lose everything in your computer , but at least ( if it works ) you'll still have a computer
2007-11-28 01:42:48 · answer #5 · answered by lividworker 2 · 0⤊ 0⤋
Try unplugging everything from you computer except your keyboard, mouse, and power cord. Then try all the choices again.
2007-11-28 01:34:08 · answer #6 · answered by Anonymous · 0⤊ 0⤋
You may need to reinstall OS
2007-11-28 01:32:13 · answer #7 · answered by N R Mohanraj 4 · 0⤊ 0⤋
unplug any newly installed devices
or remove any newly installed apps
2007-11-28 01:33:10 · answer #8 · answered by Anonymous · 0⤊ 0⤋
i guess you are having a hardware issue... you need a tech to check this.
2007-11-28 01:33:05 · answer #9 · answered by omigodgem 4 · 0⤊ 0⤋