I recently received a flat screen tv and want to hang it up on the wall. I understand I have to buy a wall mount but I've also heard that you have to be sure your wall can "handle the weight of the tv" . Apparently, something about the drywall. I'm so very lost. Please help guys ... I don't want to hang it up and then it fall and break.
2007-11-27 07:43:36 · 16 answers · asked by 1 Love 3 in Home & Garden ➔ Do It Yourself (DIY)
You need to make sure you attatch the mount to a stud in the wall.. Purchase a "stud finder" tool... You need to see how far away your studs are from eachother to see if they will be able to support the weight of the TV. Depending on the size of the TV you may be able to mount the ... mount (lol) directly to one stud. but Don't just put the nail in the drywall or it will tear a big hole in your wall.. good luck!
2007-11-27 07:47:44 · answer #1 · answered by Sugar 5 · 0⤊ 0⤋
If you purchased the TV, then the store that you bought it from should offer installation services. Pay for it. If you want to do it yourself, then go to Lowes and buy a studfinder. Thfinder picks-up n the nails in the drywall. Those are nailed into the studs. If you do not want to do that, then from a corner, measure 16". That should put you on the "center" of a stud. Then every 16" after that. Once you find the studs, use the proper hangers that will support the weight of the TV and mount. Do not be afraid to go overkill on this.
2007-11-27 08:26:12 · answer #2 · answered by Sean and Cyndi R 2 · 0⤊ 0⤋
The stud finder is pretty well a must! Studs are normally located 16 inches apart as a rule of thumb also. Hopefully your new mount will be able to reach across 3 studs but if it doesn't that's OK. 2 studs will work fine and in a pinch like I was....1 stud will work. If your new mount holes will not line up with where your studs are, drill some new holes through the mount. I have 2 three inch lag screws holding my 42" plasma on the wall.It's solid and won't budge!........don't forget to level your mount on the wall before screwing it in, don't want to have it all set up to find your tv is on a slight angle!
2007-11-27 08:05:12 · answer #3 · answered by caper007 2 · 1⤊ 0⤋
Probably the best idea would be to buy a stud finder and search for any wood beams within the wall. You will want to attach your wall mount to these beams to make sure that the weight of the TV will be supported. Stud finders are usually around $20-30.
2007-11-27 07:47:37 · answer #4 · answered by Anonymous · 0⤊ 0⤋
obviosly i'm not a man but i would suggest buying a stud finder found at hardware stores. they are normally little things with a light that comes on when you find a stud or support beam behind walls. i would screw the screws for the wall mount into the studs behind the wall. if you are really worried about it you could get someone to install it for you or ask a male friend to help good luck.
2007-11-27 07:50:48 · answer #5 · answered by ASHLEIGH P 3 · 0⤊ 0⤋
You will want to locate the wood studs behind the drywall and screw into the studs. You can buy an electronic stud finder at Lowe's or Home Depot to help you locate the studs.
It would be best to hire a professional or find a Man to do this job.
2007-11-27 07:49:28 · answer #6 · answered by Dash 7 · 0⤊ 2⤋
Hi
A stud finder is a must if you intend on DIY or just a stud if you don't
Most mounts will take 30+ pounds have a look here to get an idea:
http://www.flat-screen-tv-guide.com/tv-stands.html
For a professional job, choose the STUD!
Merry Christmas
2007-11-27 20:13:09 · answer #7 · answered by Steve B 2 · 0⤊ 0⤋
You need locate the beams in the wall and attach the set to the beams; NOT the drywall. These beams are/should be 16 inch's apart center to center. You also need your power supply and room to run your cable hook-up, or antenna: which ever your going to use. The outer walls usual have the strongest support beams, it depends on the area building codes.
2007-11-27 07:54:46 · answer #8 · answered by zipper 7 · 1⤊ 1⤋
Put the mount in the wall stud. You will know when you hit it. You can buy a stud finder at home depot.
2007-11-27 07:47:33 · answer #9 · answered by Anonymous · 1⤊ 1⤋
theres a tool at almost any hardware store that helps you locate the wood supports behind the drywall, use that to find the strongest part of your wall.
also, while at home depot ask a professional installer there, dont go by my opinion alone, i wouldnt want you to ruin your new tv!
2007-11-27 07:46:49 · answer #10 · answered by Anthony C 6 · 1⤊ 1⤋