English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

I'm trying to adjust the idle on my GSX-R600 2006, but it's my first bike. In order to adjust the idle i have to remove the left fairing. I tried to follow the manual, but all it says is "remove the bolts and hooks" but i can't figure out how to remove the "hooks" which look like 2 small white things with a black paddle wheel thing in the middle. If anyone could dumb it down and explain how to do it, and anything else that isn't simple bolt removal for removing the fairing, and adjusting the idle, i'd be most appreciative. Thanks.

2007-11-27 04:55:37 · 2 answers · asked by Sean K 2 in Cars & Transportation Motorcycles

2 answers

It just bolts on.
Go to -
http://www.bikebandit.com/parts
Side Cowling - click "Large Image" for a better view.
Pick out the #s that are giving you trouble and re-ask this question.

2007-11-27 08:08:07 · answer #1 · answered by guardrailjim 7 · 0 0

I just bought an 03 gsx1000 and I believe I just remove all the bolts and pull the thing off. I would try taking all the bolts out and then just give it a little tough love (don't break anything). If it doesn't come off then just look at what you are dealing with and I'm sure you can figure it out. If you get stuck call a dealarship and ask them, normally they'll be happy to tell you. When you get in there the throttle cable should pull on a plate to allow gas into the engine, on one corner of the plate there should be a screw holding the plate up a little bit, this is you're idle control, drive the screw in pushing the plate further back the way that it goes when the cable is pulled.

Of course an 06 could be completely computer controlled, but I think all motorcycles are still drive by wire so that's what I would expect, sorry I can't be more helpful.

2007-11-27 06:37:54 · answer #2 · answered by Nate 6 · 0 0

fedest.com, questions and answers