no
2007-11-22 04:55:02
·
answer #1
·
answered by Anonymous
·
0⤊
0⤋
If you use a 1.7xxxx or 11/7 based numbering system, then yes. Example: 11/7 = 1. 22/7 = 2.
This is like binary, or hexadecimal, where 5 in binary = 101. 5 does not equal 101, its just that there are only 2 numbers allowed in binary, 0, and 1. As for hexadecimal, the number 12 is B, since it goes 0 1 2 3 4 5 6 7 8 9 A B C D E F 10 11 ....
i hope this helps. -_-
2007-11-22 04:57:40
·
answer #2
·
answered by cowboydanimal 4
·
0⤊
0⤋
Pi is the circumference of a circle divided by its radius. That ratio is so exact and occurs often that it was given a special character: pi. Most people use 22/7 in calculations, but it only repeats the 3.14 part. The rest of 22/7 does not match the number for pi; however, it is the closest to a fraction that people have arrived at.
2007-11-22 05:36:43
·
answer #3
·
answered by james w 5
·
0⤊
0⤋
Depends how you define pi.
The mathematical definition of pi is usually so rigorous that it always has the same value of 3.1415926etc.
However, it you use it as the ratio, in a circle, of the circumference over the diameter (or over twice the radius) and it you use a non-plane surface, then it is possible to have any value you want (hence the reason for the strict definition mentioned above).
For example, place yourself at the north pole on a sphere with a radius equal to Earths (we'll just imagine Earth being a perfect sphere for this thought experiment).
You place the dry point of the compass exactly at the pole and draw a small circle of radius r. Over such a small distance, the ratio of the circumference over 2*r is 3.1415926etc. That is why we say, over very short distances, Earth's surface can be considered flat.
Let's get a huge compass and draw a circle with a radius r of exactly 1800 nautical miles. The circle we will draw will correspond to the line of latitude 60 degrees (North).
Remember that I'm considering the Earth to be a perfect sphere, in practice, you may have to use a slightly different radius.
The circumference of the circle of latitude 60N can easily be measured: it is 10,800 nautical miles.
Divide the circumference by 2*r = 10,800 / 3,600 = 3.0 exactly.
Get an even bigger compass, use a radius of 5400 nautical miles. You will then draw the equator. The length of the equator is 21,600 nautical miles (used to be the basis of the definition of the nautical mile before the SI took over).
21,600 / (2*5400) = 2
And, of course, you can continue to make the radius bigger and draw circles of southern latitudes (circumference smaller than the equator) to get even smaller values of our newly defined "pi", all the way down to 0 when we use a radius of 10,800 nautical miles.
2007-11-22 05:14:24
·
answer #4
·
answered by Raymond 7
·
0⤊
0⤋
NO! Pi equals 3.14 and that is all of it I know but it goes on for what seems like forever.
2007-11-22 04:56:22
·
answer #5
·
answered by animal luver 5
·
0⤊
0⤋
Actually, Pi is equal to:
3.1415926535 8979323846 2643383279 5028841971 6939937510 5820974944 5923078164 0628620899 8628034825 3421170679 8214808651 3282306647 0938446095 5058223172 5359408128 4811174502 8410270193 8521105559 6446229489 5493038196 4428810975 6659334461 2847564823 3786783165 2712019091 4564856692 3460348610 4543266482 1339360726 0249141273 7245870066 0631558817 4881520920 9628292540 9171536436 7892590360 0113305305 4882046652 1384146951 9415116094 3305727036 5759591953 0921861173 8193261179 3105118548 0744623799 6274956735 1885752724 8912279381 8301194912 9833673362 4406566430 8602139494 6395224737 1907021798 6094370277 0539217176 2931767523 8467481846 7669405132 0005681271 4526356082 7785771342 7577896091 7363717872 1468440901 2249534301 4654958537 1050792279 6892589235 4201995611 2129021960 8640344181 5981362977 4771309960 5187072113 4999999837 2978049951 0597317328 1609631859 5024459455 3469083026 4252230825 3344685035 2619311881 7101000313 7838752886 5875332083 8142061717 7669147303 5982534904 2875546873 1159562863 8823537875 9375195778 1857780532 1712268066 1300192787 6611195909 2164201989
And so on...
2007-11-22 04:58:06
·
answer #6
·
answered by A A 3
·
0⤊
0⤋
absolutely, pi can equal anything your little heart desires. just divide pi by pi and in your case multiply by two.
the answer is 2
in all other cases it is usually equal to 3.141592653587
2007-11-22 04:57:14
·
answer #7
·
answered by Anonymous
·
0⤊
0⤋
Pi by itself cannot equal 2. But if you subtract a number, multiply, or divide, it could.
pi*x=2
x=2/pi
pi/x=2
pi=2x
pi/2=x
pi-x=2
pi=2+x
pi-2=x
2007-11-22 04:56:17
·
answer #8
·
answered by topher098321 2
·
0⤊
0⤋
Pi is a fixed number it always stays the same
3.14159265......and so on
2007-11-22 04:58:01
·
answer #9
·
answered by max s 1
·
0⤊
0⤋
Never
2007-11-22 04:55:25
·
answer #10
·
answered by WC 7
·
0⤊
0⤋
Possibly.... if the most fundamental rules of the universe change.
2007-11-22 04:57:14
·
answer #11
·
answered by Me 2
·
0⤊
1⤋