i have replaced the relay,checked the wires back to the pump and no single, but you jump the relay you get one. so i by passed the relay to get pump to run, but there is no injector fire, what is it, i really need a wire diagram but autozone doesnt have one. someone help, i know its not the inertia switch bc there is no single at all goin back to the pump untill you bypass the relay
2007-11-18 09:11:27 · 2 answers · asked by carguyseeksanyone 2 in Cars & Transportation ➔ Maintenance & Repairs
oh yeah also replaced the starter switch..so i know thats not the problem.
2007-11-18 09:35:18 · update #1
This is only a guess but, those years, everything ran thru the starter switch. They would overheat and go bad. Most times, they are inside the steering column just under the wheel and pretty easy to change. Cheap too.
2007-11-18 09:33:39 · answer #1 · answered by Bob H 7 · 0⤊ 0⤋
Check the owners manual and it should show where it is located. more than likely it is under the hood under a plastic cover. the cover shoulr have a diagram showing which relay is which. IF you don't have an owner's manual or the diagram take your car to Auto ZOne or another parts place and they should be able to point it out and in fact sell you one at the same time. OF course if your car won't start then you will have to walk there.
2016-05-24 02:21:55 · answer #2 · answered by Anonymous · 0⤊ 0⤋