which ones would you throw away even if brand new still in the box
explain why please
2007-11-16 13:36:51 · 9 answers · asked by cedykeman1 6 in Home & Garden ➔ Do It Yourself (DIY)
Best by far: Dewalt. I've been using Dewalt for 20 years. All of my crews use Dewalt.
I would never throw a tool away, even if it was a cheap one. I would donate it to someone.
2007-11-16 13:48:57 · answer #1 · answered by Steve in NC 7 · 1⤊ 0⤋
It is hard to say who makes the best power tools because no where do I read about Ridgid tools and some of the newer tools or even newer models. Use consumers guide but also read and research tools. I was reading fine homebuilding and they said Skil saw made the best circular saw but for a carpenter it and all of the other brands may be too heavy if you have to carry them. It truly is an excellent circular saw. They recommend some of the lighter tools. Dont negate the newer tools because they may have improved. Nothing beats testing tools on your own. This costs a lot so in all reality most people have never tried all of the tools out there because they can afford only one. There are also commercial tools out there that may be good as well.
2016-05-23 22:17:46 · answer #2 · answered by ? 3 · 0⤊ 0⤋
Good:
Dewalt, great drills
Portacable, great sanders
Makita, I have a 12 year old circular saw and just got rid of a cordless power drill about the same age.
Jonsered, Commercial grade saws are great
Husqvarna, also a great brand
Sthl, take a good beating
Bad:
Craftsmen, (they don't usually warranty their power tools because they know they are crap)
Ryobi: poorly made, batteries don't last
Skill: No longer a good brand
Black and Decker: Anything you buy at Walmart will be walmart quality.
If you are on a budget, stay away from cordless tools. Cheap battery operated equipment wont last long compared to their tethered counterparts. They often make the replacement batteries cost nearly as much as a new drill. Also, stay away from these "multi-use" tool kits, with one battery that fits a half a dozen other tools.
Some cheap tools are better than others, and are ok to buy. In my opinion, a cheap random orbital sander is as good as an expensive random orbital sander. Power drills on the other hand, will cause a lot of hardship if you don't spend the extra money.
2007-11-16 15:33:02 · answer #3 · answered by Special K 3 · 1⤊ 0⤋
It depends on the use of the tools. If you are somebody who will occasionally use a tool, then I would suggest an inexpensive set such as ryobi, a decent set for the average homeowner, but not one for a contractor or somebody who will use the tool day in/day out. For the contractor, I would recommend a Ridgid tool set. The great thing about this line is the lifetime service agreement. Most other tool companies offer anywhere from three to five years. Also the Ridgid line is priced lower the Dewalt line.
I have to also comment of the quality and durability of the batteries of all power tools. The Ni-Cad battery is currently the most common battery on the market. It really doesn't have a long shelf life, usually 1000 "cycles". A cycle is each time a battery is placed on the charger, even when its fully charged. Also the Ni-Cd battery does tend to lose its charge atfer an extended time after use. Finally the Ni-Cd battery does have tempature limits on where it can effectively hold a charge.
Lately, many power tool companies have begun to adopt the technology of the cell phone by designing a lithium-ion battery. The Lithium Ion holds a charge for a longer period of time, takes a shorter time to charge. Also the Lithium Ion battery does not lose a charge after a period of inactivity. Finally the Lithium ion has higher tolerances for heat and cold in order to charge. With that being said,do your homework to see if the new lithium-ion batteries will operate in the set you will buy. Milwaukee, Ridgid, and Ryobi all have introduced a lithium ion battery that is compatible with their previous sets, Makita also has a lithium ion set, but it is incompatible with the older ni-cd batteries. DeWalt hasn't introduced a lithium-ion battery yet, but is looking to make theirs compatible with the older tools.
2007-11-16 19:59:58 · answer #4 · answered by fidel410 5 · 0⤊ 1⤋
First of all you would never throw one away. You use it till it quit's. I think Milwaukee, Black & Decker, Porter Cable, and Haitachi make top of the line power tools. You must remember that most of these upper level brands have 2 or 3 lines for home use on up to commercial grade.
2007-11-16 13:52:13 · answer #5 · answered by Anonymous · 1⤊ 0⤋
I like dewalt, supposedly made in U.S. still also milwaukee good ones too.
My list would include #1 Dewalt
#2 Milwaukee
#3 would be Ridig from home dpot
#4 Stanley products
#5 black & Decker made by (Dewalt)
2007-11-16 21:18:12 · answer #6 · answered by ? 7 · 1⤊ 0⤋
Dewalt, Makita and even Craftsman are good. With Craftsman
you do need to buy the top of the line equipment.
2007-11-16 14:04:28 · answer #7 · answered by producer_vortex 6 · 0⤊ 0⤋
Porter Cable...top of the line.
Toss any craftsman or black & decker.
2007-11-16 14:12:43 · answer #8 · answered by pumpdatiron 6 · 1⤊ 1⤋
did everyone forget about ridgid, you cant beat lifetime warranties. everyone knows craftsman and black and decker are junk
2007-11-16 15:06:14 · answer #9 · answered by coreykehoe 1 · 2⤊ 1⤋