joint or cv joint
2007-11-16 08:08:15 · 6 answers · asked by texan 1 in Cars & Transportation ➔ Maintenance & Repairs
It's most likely the cv joint>
2007-11-16 08:15:13 · answer #1 · answered by Ron B 6 · 1⤊ 0⤋
Right! But the other way CV and/or Ball Joints, Check CV Joints First, Both Sides!
2007-11-16 12:10:27 · answer #2 · answered by sidecar0 6 · 0⤊ 0⤋
Most likely CV joint. You can't tell for sure until it is up on the hoist. Replacing the axle, complete with 2 new CV joints, should run $200 or less, replacing just one joint is probably close to $150.
2007-11-16 08:20:11 · answer #3 · answered by Fred C 7 · 1⤊ 0⤋
Yes, sometimes when you look the Rubber Boot will be busted. But, that what it is.
I had a 1992 Taurus and it cost about $80 at Auto-Zone New not rebuilt. This was the whole axle on the passenger side (Inside and Outside CV). Took all day for me to replace working slow and not rushing myself.
2007-11-16 08:12:34 · answer #4 · answered by Snaglefritz 7 · 0⤊ 0⤋
a cv will make a grumbling sound not a pop check ball joint and k member mounts they go bad a lot on taurus
2007-11-16 08:45:50 · answer #5 · answered by easytom92 2 · 0⤊ 1⤋
CV joint or - less likely - wheel bearing.
2007-11-16 08:13:10 · answer #6 · answered by Anonymous · 1⤊ 0⤋